Super Micro Computer, Inc

Sr. Hardware Engineer

Super Micro Computer, Inc$155K — $175K *
Telecommunications & Hardware
5 - 7 years of experience
Job Overview by Ladders

Qualifications

  • Bachelor's or master's degree in electrical engineering, Power Electronics, Computer Engineering, or a related discipline.
  • Minimum of 5+ years of hands-on hardware engineering experience with DC-DC power design and server hardware.
  • In-depth expertise in switch-mode power supply topologies and multi-phase VR controllers.
  • Proficiency in schematic capture tools like Cadence Allegro Design Entry HDL / OrCAD Capture.
  • Solid understanding of server power architectures and fault protection mechanisms.,

Responsibilities

  • Lead the design and schematic capture for high-current server motherboard DC-DC power delivery systems.
  • Perform component sizing and power loss calculations for various power electronics components.
  • Establish PCB power layer constraints and collaborate on power integrity and EMI compliance.
  • Direct hardware bring-up and lab validation processes to ensure system performance.
  • Drive root-cause investigations for power anomalies in collaboration with cross-functional teams.
  • Interface with silicon partners on custom part evaluations and establish design guidelines.
  • Mentor junior engineers through schematic and layout review, providing technical guidance.

Benefits

  • Comprehensive benefits package including health, dental, and retirement plans.
  • Participation in bonus and equity award programs.
  • Technical mentorship opportunities and career development support.
Full Job Description
Job Req ID: 30146

Job Summary:

We are seeking an experienced and proactive Senior Power DC-DC Hardware Engineer to drive end-to-end power delivery design for next-generation server platforms. In this role, you will lead the architecture, schematic design, layout constraint definitions, and comprehensive validation of complex board-level DC-DC converters and voltage regulator modules (VRMs). You will serve as a technical subject matter expert, resolving complex cross-functional challenges and mentoring junior engineers.

The ideal candidate is self-motivated, results-driven, and passionate about developing best-in-class server products with outstanding performance and reliability.

Essential Duties and Responsibilities:

  • Power Architecture & Design: Lead the end-to-end design, schematic capture, and BOM selection for high-current server motherboard DC-DC power delivery systems, including multiphase voltage regulator modules (VRMs), point-of-load (POL) regulators, and power management circuits.
  • Component Evaluation & Modeling: Perform component sizing, worst-case stress analysis, power loss calculations, and safe operating area (SOA) assessments for MOSFETs, power stages, inductors, controllers, and passive filtering networks.
  • PCB Layout & PI Direction: Establish PCB power layer stackup constraints, define high-current routing strategies to minimize parasitic inductance and loop resistance, and collaborate closely with CAD/layout engineers on power integrity (PI) and EMI compliance.
  • Hardware Bring-Up & Lab Validation: Direct the bring-up, loop stability compensation, dynamic load transient tuning, ripple/noise verification, and power efficiency profiling across line, load, and temperature extremes.
  • Cross-Functional Issue Resolution: Drive root-cause investigations and failure analysis (FMEA) for complex board- and system-level power anomalies in coordination with signal integrity, thermal, mechanical, firmware, and validation teams.
  • Design Standards & Vendor Alignment: Interface with silicon partners and component vendors on custom part evaluations, roadmap alignment, and technical support; establish and document internal power design guidelines, review checklists, and validation standards.
  • Technical Mentorship: Review schematics and layout artwork from junior engineers, providing technical guidance and mentoring across the hardware engineering team.


Qualifications:

  • Education: Bachelor's or master's degree in electrical engineering, Power Electronics, Computer Engineering, or a related discipline.
  • Experience: Minimum of 5+ years of hands-on hardware engineering experience with a primary focus on board-level DC-DC power design and server or enterprise computing hardware.
  • Technical Proficiencies:
      • In-depth expertise in switch-mode power supply (SMPS) topologies (synchronous buck, multiphase buck, boost, isolated/non-isolated DC-DC converters).
      • Strong knowledge of multiphase VR controllers (e.g., IMVP/VR13/VR14 or equivalent), smart power stages (SPS/DrMOS), and digital power telemetry (PMBus, I2C, SVID).
      • Proficiency in schematic capture and netlist management tools (e.g., Cadence Allegro Design Entry HDL / OrCAD Capture).
      • Advanced lab skills using high-bandwidth digital oscilloscopes, electronic loads, programmable DC power supplies, frequency response analyzers .
      • Solid understanding of server power architectures, enterprise CPU/GPU/memory power delivery constraints, and fault protection mechanisms (OVP, OCP, UVP, OTP).
  • Communication & Leadership: Proven track record of independently driving power hardware projects, resolving high-impact technical blockers, and collaborating effectively across multidisciplinary engineering teams.


Salary Range

$155,000 - $175,000

The offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs.

About Super Micro Computer, Inc

Super Micro Computer, Inc. designs, develops, manufactures, and sells server solutions based on modular and open architecture. The company offers a range of server, storage, and networking solutions, as well as application-optimized software. Super Micro Computer's products are used in data centers, cloud computing, enterprise IT, big data, high performance computing, and embedded systems. The company was founded in 1993 and is headquartered in San Jose, California.
Learn more about Super Micro Computer, Inc
Size
4,155 employees
Market Cap
$4.3 billion
Industry
Net Income
$88.5 million
5 Year Trend
+15.9%
Revenue
$3.2 billion
NASDAQ

Similar Jobs

More Jobs at Super Micro Computer, Inc

  • Super Micro Computer, Inc
    Product Manager
    $88K — $160K *
    San Jose, CA 95123 (Santa Clara County)
    Enterprise Technology
    In-Person
  • Super Micro Computer, Inc
    Sr. Production Quality Engineer
    $100K — $138K *
    San Jose, CA 95123 (Santa Clara County)
    Manufacturing & Automotive
    In-Person
  • Super Micro Computer, Inc
    Sr. Firmware Engineer
    $160K — $180K *
    San Jose, CA 95123 (Santa Clara County)
    Telecommunications & Hardware
    In-Person
  • Super Micro Computer, Inc
    Sr. Production Quality Engineer
    $100K — $138K *
    San Jose, CA 95123 (Santa Clara County)
    Manufacturing & Automotive
    In-Person
  • Super Micro Computer, Inc
    Sr. Benefits Manager
    $120K — $170K *
    San Jose, CA 95123 (Santa Clara County)
    Manufacturing & Automotive
    In-Person

More Telecommunications & Hardware Jobs

Find similar Sr. Hardware Engineer jobs: