Responsibilities

Build Optical Systems That Actually Fly

Orion Space Solutions designs and builds operational space payloads for national security and advanced sensing missions. Our instruments fly on orbit and deliver mission-critical data for government and commercial customers.

We are looking for a top-tier EO/IR Optical Engineer who can own the optical answer from model to measurement to flight hardware. This is not a generic lens-design role. You will work on real payloads, real test data, real alignment problems, and real mission performance.

This role is focused on non-sequential ray tracing, optical metrology, interferometry, stray-light control, and payload verification. You will help extend Orion's capability in EO/IR payloads, narrowband imaging systems, Fabry-Perot / etalon-based instruments, optical benches, and contamination-sensitive flight or prototype hardware.

If you want to build models that drive hardware decisions - and then see those decisions tested in the lab and flown in space - this is the job.

What You Will Do

• Build, maintain, and validate FRED non-sequential optical models for EO/IR payloads, optical benches, baffles, filters, detectors, calibration sources, and flight-like test setups.
• Perform stray-light, ghost, scatter, vignetting, detector-irradiance, and baffle analyses that directly influence hardware design.
• Model realistic coatings, apertures, stops, source geometries, CAD structures, surface scatter, BRDF/BSDF data, and detector response maps.
• Plan and execute optical metrology for lenses, mirrors, windows, filters, etalons, optical flats, optical benches, and assembled payloads.
• Use interferometric methods to evaluate surface figure, transmitted wavefront error, wedge, parallelism, optical alignment, and system-level wavefront performance.
• Support PSF, MTF, spectral transmission, radiometric, and stray-light testing for prototype, engineering, and flight hardware.
• Develop alignment plans, test procedures, verification matrices, supplier acceptance criteria, and optical analysis reports.
• Work directly with optical, mechanical, thermal, detector, software, manufacturing, quality, and program teams in rapid design-build-test cycles.
• Help solve hard optical performance problems when the model, metrology data, hardware, and schedule do not initially agree.

You will be responsible for real payload performance, not just plots and presentations.

Qualifications

Required:

• BS with 12-15 years, MS with 10-13 years or PhD with 10+ years in Optical Engineering, Physics, Applied Physics, Aerospace Engineering, or a related technical field.
• 5+ years of hands-on optical engineering experience; senior-level judgment in EO/IR, space, aerospace, defense, or precision instrumentation strongly preferred.
• Direct experience with FRED or equivalent non-sequential optical modeling tools; FRED experience is strongly preferred.
• Experience with stray-light, ghost, scatter, baffle, or detector-irradiance analysis.
• Hands-on optical metrology or interferometry experience, including test setup, data interpretation, and error-source diagnosis.
• Ability to interpret and specify surface figure, TWE, wedge, parallelism, roughness, coating performance, spectral transmission, PSF, and MTF.
• Ability to convert analysis and test results into engineering decisions, tolerances, procurement specifications, and verification evidence.
• Clear technical writing and the ability to brief results to scientists, engineers, program managers, customers, and suppliers.

You should be comfortable with:

• Incomplete information, aggressive schedules, and hardware that needs to work the first time.
• Working at the boundary between optical design, lab metrology, optomechanics, contamination control, and flight qualification.
• Walking from a FRED model into the lab, looking at the hardware, and closing the loop with measured data.
• Owning technical closure rather than waiting for someone else to define the next step.

Strongly Preferred

• Experience with space payloads, satellite instrumentation, missile-warning, remote-sensing, or national-security optical systems.
• Experience with Fabry-Perot etalons, interferometers, narrowband imaging systems, hyperspectral/spectral instruments, or high-stability optical benches.
• Experience using Fizeau or phase-shifting interferometers, autocollimators, spectrometers, monochromators, integrating spheres, collimators, or detector test stations.
• Familiarity with Zemax OpticStudio, CODE V, MATLAB, Python, SolidWorks/CAD import workflows, optical coating data, and ISO 10110 optical specifications.
• Experience supporting environmental test, thermal vacuum, vibration, cleanroom optical handling, contamination control, supplier acceptance, or AS9100 development environments.

Equal Pay Act

This is the projected compensation range for this position. There are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. In addition, Arcfield invests in its employees beyond just compensation. Arcfield 's benefits offerings include, dependent upon position, Health Insurance, Life Insurance, Paid Time Off, Holiday Pay, Short Term and Long-Term Disability, Retirement and Savings, Learning and Development opportunities, wellness programs as well as other optional benefit elections. Min: $149,675.71 Max: $260,257.02