BS or MS in Mechatronics, Electrical, or Mechanical Engineering, or related field with 3+ years in a prototype or failure-analysis lab.
Experience with robotic, vehicle, or drone hardware including PCBAs, harnesses, actuators, sensors, and power systems.
Ability to methodically root-cause hardware failures and communicate findings clearly.
Proficiency in parametric CAD for parts and fixtures (Onshape preferred).
Solid knowledge of circuits, power distribution, and signal integrity, with the ability to read PCBA schematics and cable drawings.
Experience with SMD soldering and rework down to 0402, including hot-air and microscope work.
Strong mechanical fundamentals including tolerance analysis and material selection.
Responsibilities
Own fleet uptime by troubleshooting and repairing electromechanical issues with minimal supervision.
Track failures across the fleet and write root-cause reports to drive design and process improvements.
Drive rapid prototypes end-to-end by building, testing, and iterating on sub-assemblies and full systems.
Design in CAD and fabricate custom test fixtures and enclosures, producing machining-ready drawings.
Read and interpret schematics and PCB layouts to test and troubleshoot PCBAs and create custom harnesses.
Operate standard bench equipment and perform PCBA and cable rework to IPC standards.
Document prototyping phases and manage design files under version control.
Benefits
Flexible work environment with opportunities for hands-on experience.
Collaborative team culture with direct interaction with multiple engineering disciplines.
Access to cutting-edge technology and robotics platforms.
Opportunities for professional growth and skill development in a fast-paced setting.
Full Job Description
Position Overview
We are looking for a Support Engineer to develop the systems and processes that ensure quality, reliability, and performance across our robotics and autonomous platforms. This role is hands-on with integrated hardware systems and entails building prototypes, designing/fabricating test setups in CAD, debugging/diagnosing electromechanical issues, and supporting manufacturing workflows.
You'll split your time between fleet support and prototyping: triaging electromechanical failures across deployed units, running the repair and RMA workflow from intake to return to service, and taking new hardware from concept through CAD, fabrication, bring-up, and validation. You'll track failures across the fleet, pull logs and telemetry to separate hardware faults from software faults, and turn recurring issues into clear root-cause reports that shape the next design. You'll work directly with Electrical, Mechanical, and Firmware Engineers to accelerate iteration, raise reliability, and lay the groundwork for scalable production. Responsibilities
Own fleet uptime: troubleshoot, root-cause, and repair electromechanical issues across a growing fleet with minimal supervision, and run the repair/RMA workflow from intake through return to service.
Track failures across the fleet, identify recurring issues, and write clear root-cause reports that drive design and process fixes.
Drive rapid prototypes end to end: build, test, and iterate on sub-assemblies, feasibility units, and full systems alongside other engineering teams.
Design in CAD and fabricate custom test fixtures, jigs, enclosures, and harnesses; produce machining-ready drawings using GD&T.
Read and interpret schematics, PCB layouts, and cable drawings to bring up, test, troubleshoot, and rework PCBAs and create custom harnesses.
Operate standard bench equipment (oscilloscopes, logic/spectrum analyzers, programmable power supplies, DMMs) and perform PCBA and cable rework to IPC standards.
Use the command line to flash firmware, pull and parse logs over SSH or serial console, and run diagnostic scripts during debug and bring-up.
Document prototyping phases, test procedures, and failure analyses clearly; manage design files and documentation under version control; source and procure components, and maintain organized BOMs for prototypes.
Maintain and troubleshoot lithium battery systems across the fleet: safe handling and charging, monitoring BMS behavior, and diagnosing pack and cell-level faults.
Work with embedded communication protocols (CAN, UART, I2C, SPI) and common robotics sensors (IMU, GPS, cameras, LiDAR).
Preferred Qualifications
BS or MS in Mechatronics, Electrical, or Mechanical Engineering, or a related field, with 3+ years in a prototype, development, or failure-analysis lab.
Experience with robotic, vehicle, or drone hardware: PCBAs, harnesses, actuators, sensors, and power systems.
Demonstrated ability to root-cause hardware failures methodically from first principles, communicate findings clearly, and act on them.
Proficiency in parametric CAD for parts, fixtures, and assemblies (Onshape preferred).
Solid working knowledge of circuits, power distribution, signal integrity, and common electrical components, with the ability to independently read PCBA schematics, cable drawings, and test procedures.
SMD soldering and rework down to 0402, including hot-air and microscope work.
Crimping, rework, and harness assembly to IPC-A-610 / IPC/WHMA-A-620 standards; familiarity with connector families and electrical components.
Strong mechanical fundamentals: tolerance and fit analysis, material selection, fastener and vibration best practices, and DFM for printed, machined, and sheet metal parts.
Experience with FDM/SLA 3D printing and basic machine shop skills.
Comfort in Linux, macOS, and Windows terminals (bash, SSH, serial tools) and basic Python or bash scripting.
Thrive in a fast-paced environment where priorities and hardware change quickly.
