Job DescriptionAbout the OpportunitySolaris Energy is hiring a Senior Electrical, Protection & Controls Engineer to lead commissioning, startup and reliability work on fast-track gas turbine power plants, including utility-scale and hyperscale data center sites. You will own turbine controls, excitation, protection and SCADA integration from design review through synchronization, load testing and operational handover, and you will be the technical authority when units trip or underperform.
Typical project size: 40 MW to 300+ MW multi-unit plants
Essential Functions- Lead electrical, controls and protection commissioning, startup, synchronization and load testing for aeroderivative and industrial gas turbine generators (e.g., GE TM2500,Pratt & Whitney FT8, Solar Titan 130).
- Commission, modify and troubleshoot turbine control systems (GE Mark VIe, RX3i,RX7i; Woodward MicroNet and Flex500), including I/O validation, alarm and triptesting, and sequence logic checks.
- Commission and tune excitation and AVR systems (GE EX2100e; Brush A30, A32,A3100), covering auto/manual modes, VAR/PF control and load sharing.
- Configure and test generator, transformer and feeder protection relays (ABB, SEL,GE, Beckwith, Siemens, MiCOM) using Omicron secondary injection.
- Perform power system studies in ETAP and EasyPower: load flow, short circuit, relay coordination, transient stability, motor starting and arc flash. Build PSCAD models for dynamic and transient analysis.
- Integrate SCADA, HMI, PLC and RTU systems and industrial communications (IEC61850, DNP3, Modbus, IEC 60870-5-104) for local and remote plant operation.
- Develop and commission PLC logic and control software changes, such as auxiliary systems control and remote-operation enablement.
- Lead root cause analysis on turbine trips, excitation faults, communication failures, synchronization problems and protection operations.
- Support controls migrations and reliability upgrades across the fleet, for exampleRX3i to Flex500.
- Review electrical designs, mentor junior engineers and technicians, and coordinate with contractors, OEMs and customers on site.
QualificationsExperience/EducationRequired Qualifications- Bachelor's degree in Electrical Engineering (or equivalent).
- 10+ years in power generation, including 8+ years commissioning aeroderivative or industrial gas turbine plants.
- Hands-on experience with aeroderivative or industrial gas turbine units (e.g., GETM2500, Pratt & Whitney FT8, Solar Titan 130).
- Proven commissioning of at least two turbine control platforms from: Mark VIe,RX3i/RX7i, Woodward MicroNet/Flex500.
- Proven commissioning and tuning of AVR/excitation systems (EX2100e, Brush, or equivalent).
- Protection relay configuration and testing (ABB, SEL, GE, Beckwith, or similar) with Omicron or equivalent test sets.
- Working proficiency in ETAP or EasyPower for protection coordination and short-circuit studies.
- Experience with SCADA/HMI and PLC systems and common utility protocols (IEC61850, DNP3, Modbus).
- Track record as lead engineer on multi-unit plants of 75 MW or larger, from first fire through commercial operation.
- Willingness to travel and work extended site rotations, including internationally.
- Field-based role with frequent travel to project sites; extended rotations during commissioning and startup.
- Outdoor power plant and switchyard environments, including heat, noise and live-electrical hazards. Site safety training and PPE are required.
- Extended hours and on-call support during startup, testing and outages.
- Must be legally authorized to work in the U.S. without requiring sponsorship for employment visa status
Preferred Qualifications- Chartered or Professional Engineer registration (PE, CPEng, or equivalent).
- Postgraduate qualification in electrical or power engineering.
- PSCAD dynamic modelling of gas turbine generators.
- Experience with hyperscale data center or other mission-critical, fast-track power projects.
- Experience modifying turbine control software to enable remote operation.
- Substation automation training, such as IEC 61850 certification.
- Background in transmission utility protection (line, busbar, transformer and feeder).
- Experience with dual-fuel or liquid-fuel plants and with plants in Latin America, Africa or Asia.
Technical EnvironmentGas turbines - Examples: GE TM2500, Pratt & Whitney FT8, SolarTitan 130
Turbine controls - GE Mark VIe, RX3i, RX7i; Woodward MicroNet,Flex500
Excitation / AVR - GE EX2100e; Brush A30, A32, A3100
Protection relays - ABB REF630, RET650; SEL (incl. RTAC); GE T60;Beckwith M3425A; Siemens; MiCOM
Test equipment - Omicron CMC
Studies and modelling - ETAP, EasyPower, PSCAD
SCADA / HMI - GE Cimplicity, GE iFIX, Wonderware
Protocols - IEC 61850, DNP3, Modbus, IEC 60870-5-104
Additional InformationSkills and Qualifications- Exceptional communicator - direct and transparent, skilled problem-solver with proven success in building coalitions and avoiding conflicts
- Total ownership mentality - proactively identifies and removes obstacles across numerous ongoing tasks
- Independent thinker - provides original thoughts and constantly asking "how can we do this better"
- Innovative thinker - willingness to consider novel solutions ability to adapt to change
- Desirable teammate - impeccable character, humility, and collaborative
- Relentless - aspires to contribute and achieve his/her full potential
We value your hard work, integrity, and commitment to our culture through competitive pay and benefits packages and ongoing career development. - Competitive compensation packages
- Medical, Dental & Vision benefits
- Disability Insurance
- Company paid Life and AD&D insurance with supplemental offerings
- Company matching 401(k) retirement plan
- Paid time off, including 10 paid holidays
- Career Progression
- Tuition Reimbursement
This job overview is not all inclusive. In addition, Solaris reserves the right to amend this job overview at any time.