Application close date:
Applications will be accepted on an ongoing basis until the requisition is closed.
Blue Origin is pioneering the future of space-basedconnectivitywithTeraWave, a revolutionary satellite communications network designed to deliver symmetrical data speeds of up to 6Tbpsanywhere on Earth.This network will service tens of thousands of enterprise, data center, and government users who require reliable connectivity for critical operations.
About The Role:
Blue Origin is seeking anOpto-Electronics Design Engineerto join our Space Lasers team, developingoptical amplifiersforspace-based optical communications terminalsandoptical ground stations.
In this hands-on role, you will design, integrate, build, test, and troubleshoot the opto-electronic subsystems that make these amplifiers work, including pump diodes and drivers, photodetectors and power monitors, variable optical attenuators (VOAs), thermal control, and monitoring and control electronics. You will work closely with the amplifier design engineers, fiber process engineers, and the electrical, thermal, mechanical, and manufacturing teams to take designs from concept to prototype, to qualified flight and ground hardware, and into scalable production.
Key Responsibilities
Opto-Electronic Design and Integration
- Design and integrate opto-electronic components into optical amplifier assemblies, includingpump laser diodes, photodetectors/photodiodes, VOAs, tap couplers, isolators, and thermistors/TECs.
- Develop and specify supporting electronics such aspump diode drivers, TEC controllers, photodiode transimpedance and monitoring circuits, and control and telemetry interfaces.
- Support amplifier control strategies, including automatic power control (APC), automatic gain control (AGC), and safety and protection functions (e.g., back-reflection or loss-of-signal shutdown, over-temperature and over-current protection).
- Contribute to schematic capture, component selection, derating analysis, and design documentation for both space and ground applications.
- Work with amplifier architects to translate performance requirements (output power, gain, noise figure, efficiency, power monitor accuracy) into opto-electronic specifications.
Assembly, Splicing, and Fiber Preparation
- Perform hands-onfiber preparation and fusion splicing(stripping, cleaving, inspection, splicing, splice protection, and fiber management) on optical assemblies using a variety of fiber types.
- Assemble and integrate opto-electronic modules into amplifier assemblies, ensuring good workmanship and cleanliness practices.
- Contribute toDFM/DFAby documenting and improving splicing and assembly processes, work instructions, and fixtures for repeatable, scalable production.
Test, Characterization, and Troubleshooting
- Build and run test setups to characterize optical amplifier assemblies, measuring gain, output power, noise figure, ASE, spectral performance, power monitor accuracy, pump efficiency, and stability.
- Troubleshoot and root-causefailures and performance anomalies at the component, splice, assembly, and electronics levels (e.g., splice loss, back reflections, pump degradation, detector calibration issues, thermal drift).
- Develop test procedures, automation scripts, and data analysis tools to improve test efficiency and data quality.
- Support environmental testing (thermal cycling, thermal vacuum, vibration/shock) and analyze post-test results for flight and ground hardware.
- Document results, corrective actions, and lessons learned so that issues are fixed at the root and stay fixed.
Supplier and Production Support
- Support evaluation and incoming inspection of pump diodes, photodetectors, VOAs, and other opto-electronic components.
- Work with suppliers on component specifications, test data, and failure analysis.
- Support transition of designs to manufacturing, including test fixtures, acceptance test procedures, and yield improvement.
Team and Safety
- Collaborate across engineering disciplines and share knowledge to strengthen the team.
- Follow and promote laser safety, ESD, and cleanliness practices at all times.
Minimum Qualifications
- Bachelor's degree in Electrical Engineering, or a closely related field (Photonics, Optical Engineering, Physics), with 3+ yearsof relevant experience in opto-electronic design and test.
- Experience designing, integrating, or testingopto-electronic devicessuch as photodetectors, laser/pump diodes, VOAs, or similar components in optical assemblies.
- Hands-on experience testing and troubleshooting optical assemblies, such as fiber amplifiers, fiber lasers, or similar optical modules.
- Proficiency in fiber preparation and fusion splicing(stripping, cleaving, splicing, inspection, and splice protection).
- Familiarity with laboratory instruments, including optical spectrum analyzers, optical power meters, oscilloscopes, power supplies, source meters, and fiber inspection tools.
- Solid understanding of analog circuit design fundamentals and electronics for photonic systems (e.g., diode drivers, TIAs, temperature control).
- Strong problem-solving skills and attention to detail, with the ability to work both independently and as part of a team.
- Ability to meet U.S. export control requirements (U.S. person as defined by ITAR).
Desired Qualifications
- Experience withhigh-power pump integrationand specialty fiber assemblies.
- Experience withpolarization-maintaining fibersplicing and alignment.
- Experience withPCB schematic and layout tools(e.g., Altium, Cadence/OrCAD) and simulation tools (e.g., LTspice).
- Proficiency inPython, MATLAB, or LabVIEWfor test automation and data analysis.
- Experience withfirmware or embedded controlof laser drivers, amplifiers, or optical modules.
- Experience withhigh-reliability or space-qualifiedphotonics hardware, including environmental qualification, derating, and radiation effects (space experience is a plus, but not required).
- Experience with free-space optical communications or satellite laser communication terminals.
- Familiarity with IPC/J-STD workmanship standards, ESD control, and cleanroom practices.
- Experience with DFM/DFA, process validation, and transitioning hardware from lab prototype to production.
- Experience with root cause and failure analysis methods (e.g., 8D, fault tree, fishbone).
- Laser safety experience with Class 3B/4 systems.
Base Pay Range for:
WA applicants is $164,652.00 - $230,512.80
Other site ranges may differ
Culture Statement
Dont meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if youre excited about this role but your past experience doesnt align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.
Export Control Regulations
Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum.
Background Check
- Required for all positions: Blues Standard Background Check
- Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation
- Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
- Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical
Benefits
- Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.
- Stock Options for all regular employees (working at least 20 hours/week)
- Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.
- Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the companys intent to reward individual contributions and enable them to share in the companys results, or other factors at the companys sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details.