RELOCATION ASSISTANCE: No relocation assistance available
CLEARANCE REQUIRED FOR START: No
CLEARANCE TYPE: None
TRAVEL: Yes, 10% of the Time
DescriptionNorthrop Grumman Mission Systems is seeking a
Machinist 4 to join our team in
Cincinnati, OH.
This position will be responsible for
fabrication and machining (approximately 50%),
facilities and equipment maintenance (approximately 25%), and
electronics/electromechanical assembly (approximately 25%), flexing across these areas based on manufacturing and site needs.
Role Description & ResponsibilitiesAs a Machinist 4 in our Cincinnati manufacturing facility, you will:
Fabrication / Machining (Approx. 50%)- Set up and operate a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.
- Operate 3-axis CNC machining centers to machine parts per specification, including in-process and final inspections to verify dimensional and quality requirements.
- Interpret blueprints, sketches, and engineering specifications; determine sequence of operations, number of cuts required, and method of setup.
- Use a variety of machinist hand tools and precision measuring instruments; perform standard shop computations relating to dimensions of work, tooling, feeds, and speeds.
- Measure, mark, and scribe dimensions and reference points to lay out stock for machining; fit and assemble precision parts into mechanical equipment and determine material, parts, and equipment required.
- Perform complex set-ups, including tooling selection, work holding design, offsets, and program verification; resolve unforeseen or unique issues as they arise in machining a part.
- Support development and improvement of machining processes, including feedback on tooling, fixturing, and programs to improve quality and efficiency.
Facilities Maintenance / Equipment Repair (Approx. 25%)- Perform repairs and maintenance in plant or office facilities, and on production machines and equipment.
- Perform work in one or more maintenance trades such as carpentry, plumbing, painting, machine and equipment repair, electrical, sheet metal fabrication, and welding as assigned.
- Conduct routine, periodic, or special inspections to determine repair and maintenance work necessary to prevent breakdowns of facilities, machinery, and equipment.
- Use hand and power tools to test, inspect, troubleshoot, and repair machines and equipment.
- Read and work from blueprints, sketches, layouts, wiring diagrams, drawings, and specifications to plan and execute maintenance and repair activities.
- Work closely with facilities and maintenance personnel to ensure manufacturing equipment uptime and safe operation.
Electronics / Electromechanical Assembly (Approx. 25%)- Use electronic components, mechanical parts, drawings, and engineering documentation to build and/or repair units such as cable assemblies and wire harnesses, modules, and cabinet/mechanical assemblies.
- Plan, lay out, assemble, wire and solder electrical/electronic and mechanical equipment and apparatus such as controls, control panels, assemblies, and small subassemblies.
- Read and interpret schematics, wiring diagrams, and assembly drawings to perform point-to-point assembly and wiring, including routing cables and harnesses in confined spaces.
- Following appropriate wiring diagrams, perform wiring using harness boards; install mechanical parts, components, and fasteners as specified.
- Lay out and construct harness boards to assemble and form wiring and cables for a variety of electrical/electronic and mechanical assemblies and subassemblies.
- Mix and apply bonding components and encapsulants; perform product finishing functions such as conformal coating and paints/epoxies after obtaining and maintaining appropriate certifications.
- Use and operate a broad range of hand tools, assembly equipment and safety equipment to perform tasks; perform assembly and rework under microscope when required.
General- Obtain all necessary information (work instructions, drawings, travelers, specifications) to perform job assignments and report any discrepancies to appropriate personnel.
- Understand and apply Lean manufacturing principles and disciplines in machining, assembly, and maintenance work cells.
- Maintain equipment and work areas in a clean and orderly condition; comply with all safety, quality, and process control requirements.
- Work closely with other personnel and attend company-sponsored training courses to obtain knowledge and skills for career development.
Basic Qualifications - Machinist level 4- High School diploma or recognized equivalent (GED).
- 6 or more years machining experience, including:
- Advanced 3-5-axis CNC machining experience.
- Extensive experience running manual machines and performing complex set-ups.
- Experience reading and interpreting production specifications, blueprints, assembly diagrams, engineering drawings, and technical specifications (English).
- Expert-level experience in GD&T, precision measurement, and advanced shop math calculations.
- Demonstrated experience training mid- to upper-skill-level machine operators and/or assemblers.
- Demonstrated experience resolving complex machining, facilities maintenance, and assembly issues, including unique fixturing, tolerancing, repair strategies, and equipment troubleshooting.
- Experience utilizing a broad range of hand tools, assembly equipment, and safety equipment to perform tasks, including microscope-assisted assembly or repair when required.
- Experience with Lean manufacturing principles and disciplines.
- US Citizenship required
Preferred Qualifications- Machinist or maintenance technician certification from an accredited trade school.
- Exceptional mechanical/electrical aptitude.
- Experience in cable/harness assembly, cabinet/module build, and/or circuit card rework/repair.
- Experience with facilities maintenance, including inspections and repairs across multiple trades (e.g., carpentry, plumbing, sheet metal, welding).
- Experience with SAP or other ERP/MRP systems.
- AA degree in a related technical field.
What We Can Offer You -
Northrop Grumman provides a comprehensive benefits package and a work environment which encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the
flexibility and control to choose the benefits that make the most sense for you and your family.
Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off and Additional Benefits including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more!
Primary Level Salary Range: $64,600.00 - $107,600.00
The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.
Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.
The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.