SummaryThis position is located with Bonneville Power Administration, in Transmission Services, Transmission Planning (TPP), Reliability Planning/Service Planning/Infrastructure Development Planning/CapabilitiesPlanning (TPP/A/B/C/D).
A successful candidate in the Electrical Engineer position will perform a wide range of professional engineering studies and assignments related to high-voltage transmission networks.
DutiesAs an Electrical Engineer, you will:- Perform a variety of activities involved in Planning BPA's transmission system, including meeting reliability requirements for load interconnection, generator interconnection, and transmission system analysis.
- Plans and coordinates studies for extensive modifications of major segments or component equipment of high-voltage transmission networks to find means of improving performance, increasing capacity, and correcting unsatisfactory conditions.
- Plans, organizes, and conducts special studies.
- Performs preliminary engineering analyses. Thoroughly evaluates the various alternatives for meeting the objectives of the assignment.
- Develop or adapt approaches and procedures which are followed by less experienced engineers on subsequent assignments of a similar nature.
RequirementsConditions of employmentIn accordance with Executive Order 14170, applicants are encouraged to respond to four short, free-response, essay questions in the questionnaire. Answer to these questions is not scored or rated. Your answers will be reviewed by the hiring manager and agency leadership if you are referred for selection consideration
When you apply you will be asked a series of questions to determine your eligibility for employment and your qualification for this position specifically. You must answer all of these questions completely and truthfully.
Key Requirements:
- You must be a United States Citizen.
- This employer participates in the e-Verify program.
- Males must abide by Selective Service registration requirements.
- You will be required to report in person to the official duty location.
Conditions of Employment:- After employment, this position may be subject to periodic physical examinations, as prescribed by competent medical authority and at BPA expense, if exposed to health hazards.
- A preliminary background check must be completed before a new employee can begin work. Current Federal employees or other individuals with an existing completed background investigation may not be required to undergo another background check.
QualificationsBASIC REQUIREMENT:A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
-OR-B. Combination of Education and Experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional Registration or Licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR-
- Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. -OR-
- Specified Academic Courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. -OR-
- Related Curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
For more information on how to meet the Basic Requirements please visit: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
In addition to meeting the basic requirements, you must also meet the specialized experience requirements as listed below.SPECIALIZED EXPERIENCE REQUIREMENTS: GS-9: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level GS-7 in the Federal service.
Specialized experience for this position is defined as experience 1) assisting professional engineers with basic engineering tasks, math calculations, or reviews for planning, designing, running, or fixing electrical systems and equipment and 2) using standard engineering rules to gather data, review technical specs, and write basic engineering reports, charts, or notes.You may substitute education for specialized experience as follows:
- Two years of progressively higher level graduate education leading to a master's degree, or master's, or equivalent graduate degree; your education must demonstrate the knowledge, skills, and abilities necessary to do the work. -OR-
- Combination of education and experience as described above. Less than one year of specialized experience may be combined with graduate education in excess of the amount required for the next lower grade level (i.e., credit hours beyond the first year of full-time study may be credited).
GS-11: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level GS-9 in the Federal service.
Specialized experience for this position is defined as 1) independently performing standard engineering studies, analyses, or power system simulations for power systems (generation, transmission, distribution, or utilization) of limited scope and complexity using established methods and 2) reviewing technical data, equipment specs, and field test results to ensure they meet utility or industry rules; creating working drawings or detailed specs.You may substitute education for specialized experience as follows:
- Three years of progressively higher level graduate education leading to a Ph.D. degree, or Ph.D., or equivalent doctoral degree; your education must demonstrate the knowledge, skills, and abilities necessary to do the work. -OR-
- Combination of education and experience as described above. Less than one year of specialized experience may be combined with graduate education in excess of the amount required for the next lower grade level (i.e., credit hours beyond the first two years of full-time study may be credited).
GS-12: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level GS-11 in the Federal service.
Specialized experience for this position is defined as experience 1) planning and executing complex electrical studies and designs for high-voltage power lines, substations, or power plants, and modifying existing methods to resolve issues and 2) using complex power system simulation models (such as power flow, dynamic stability, EMT or fault duty) to identify and resolve transmission or grid performance issues.There is no substitution of education for experience at the GS-12 grade level.
"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
You must meet all qualifications and eligibility requirements by the closing date of this announcement.EducationThis vacancy has a positive education requirement. Education must be obtained from an accredited institution recognized by the U.S. Department of Education. See Department of Education Accreditation Search to verify school accreditation.
Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.DO NOT email or mail in any of your application documents. Documents will not be accepted outside of the online application system.
In order to be rated as qualified, you must provide copies of your college transcripts.
Failure to provide copies of your college transcripts may result in a rating of "Ineligible".Additional information- The salary is based on a Special Rate Table, Number 0754: https://apps.opm.gov/SpecialRates/
- This job opportunity announcement may be used to fill additional similar vacancies across DOE
Hiring incentives may be authorized for a highly qualified candidate based on budget availability and in accordance with federal regulations.
BPA strives to ensure a safe and positive work environment.
We also understand the importance of work/life balance and offer a variety of programs and policies designed to create more flexible, responsive work environments supportive of commitments to community, home and family members. BPA also supports employees' overall wellness through its Be Well program, which helps employees adopt healthier lifestyles and feel better about their work/life balance. The program supports five key areas of life: career, community, financial, physical and social.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
BenefitsHelp
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you
