The
UC-35 Cessna Citation Army Transport Quality Control Inspector (UC-35 QC-TI) is responsible to the Site Supervisor. when performing QC duties and inspections required during actions performed by their respective site. QCI's perform spot-checks on work in progress, final inspections on maintenance items and are familiar with the provisions and responsibilities in the various programs managed and monitored by QC.
- Must possess a valid (FAA) A&P certificate with a valid (FAA) IA Inspection Authorization, required.
- A minimum of Three (3) years hands-on maintenance experience on the Army UC-35 Cessna Citation aircraft is required.
- US Citizenship is required to obtain the US Govt Secret Clearance.
- Comply with FAA regulations as applicable
- Comply with written company maintenance and logistics procedures
- Know, understand and comply with the requirements outlined in the Contractor Logistics Support (CLS) Transport statement of work.
- Ensure aircraft records keeping procedures comply with the requirements outlined in DA PAM 738-751. Perform other duties as assigned by Management.
- Deploy to overseas locations with unit aircraft to support operational requirements.
- Perform inspections, conduct evaluations and report deficiencies in all areas of contract performance as detailed in the applicable Quality Assurance Procedures.
- Annual review of forms for accuracy, intent and necessity
- Are authorized to stop work or prevent an aircraft from being released for flight if discovering of a deficiency creates an unsafe condition and/or presents a hazard to property or personnel.
- Perform evaluations and inspections as outline in the QAP
- Implement applicable Quality Control policies and procedures.
- Maintain records of Evaluator Proficiency Evaluations.
- Perform other qualified duties as assigned.
Minimum Requirements- Bachelor's degree preferred, a High School Diploma or GED equivalent is required.
- A valid (FAA) A&P Certificate is required. IA is preferred.
- Two or more years' experience in any combination of the following areas: Quality Control or Quality Assurance representative, US Army Maintenance Quality Assurance, International Standardization Organization (ISO)-9000 or Safety and Environmental Compliance on the UC-35 aircraft.
- Three (3) or more years' experience as a maintainer on the UC-35 Citation or similar aircraft.
- Must be proficient in the use of AWBS.
- In-depth knowledge of the FAA, Army, & Cessna Citation 560 policies and maintenance.
- A valid drivers' license is required.
- Must be able to obtain/maintain a valid US Passport for OCONUS TDY travel, if requested.
- Must have the ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.
AR95-20) A&P Mechanic Pre-employment Medical Requirements:- Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. (BMI Body Mass Index below 40 is required).
Security Clearance Requirements:- Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.
Preferred Qualifications:- Maintain a clean and organized workplace, promote housekeeping, safety and environmental control standards in all work areas
- Moves about both inside aircraft hangar and outside on aircraft ramp within close proximity of running equipment and aircraft
- Must have the ability to pull/push up to 50 lbs and be able to stand/squat/bend/walk/climb/maneuver in and around aircraft.
- Must be able to speak, read, write, and understand English.
- Be physically able to deploy with unit aircraft to overseas locations.
Compensation Details:55.23
Benefits Overview:Our health and welfare benefits are designed to support you and your priorities. Offerings include:
- Health, dental, and vision insurance
- Paid time off and holidays
- Retirement benefits (including 401(k) matching)
- Educational reimbursement
- Parental leave
- Employee stock purchase plan
- Tax-saving options
- Disability and life insurance
- Pet insurance
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.
Original Posting:10/20/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.
