Supervisory General Engineer

Summary

This position is with the U. S. Department of Labor, Occupational Safety and Health Administration (OSHA) in the Directorate of Technical Support and Emergency Management (DTSEM), in the OSHA Technical Center, Engineering Support Division, located in Sandy, UT.

• This position is at the full performance level.
• This position is outside the bargaining unit.
• This position is NOT remote. Selectee will be required to report to the office listed above.

Duties

Help

Major duties of the Supervisory General Engineer position include, but are not limited to, the following:

• Operating laboratory and testing functions under a total quality system with standard operating procedures.
• Overseeing, developing and/or modifying complex systems for calibrating equipment used to measure hazardous conditions in occupational environments such as but not limited to air velocity meters, air sampling pumps, gas monitors, and the like.
• Designing or overseeing the design of testing protocols for both field and internal laboratory equipment; periodically reviewing national regulatory standards and reviewing Commission decisions to determine adequacy of field equipment to enforce OSHA standards.
• Performing the full range of supervisory responsibilities such as assigning and reviewing work of subordinates, approving personnel actions, developing position descriptions and making selections for vacancies.
• Developing performance standards and appraises employees on their performance.
• Participating in national regulatory standards setting groups which are developing standards that are related to and/or affect OSHA's instrumentation needs.

Requirements

Help

Conditions of employment

• Must be at least 16 years old.
• Must be a U.S. Citizen.
• Candidate required to obtain the necessary security/investigation level.
• Requires a probationary period if the requirement has not been met.
• Requires a supervisory probationary period if the requirement has not been met.

Qualifications

THE ENGINEER SERIES HAS AN INDIVIDUAL OCCUPATIONAL REQUIREMENT. ALL APPLICANTS MUST MEET THIS REQUIREMENT IN ORDER TO BE CONSIDERED. You must meet the "Individual Occupational Requirement" and the "Specialized Experience" as described below, to qualify for the Electronics Engineer position.

*You MUST provide transcripts with your application package. Official transcripts will be required before time of hire.

INDIVIDUAL OCCUPATIONAL REQUIREMENT (IOR):

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the Individual Occupational Requirement (IOR), applicants must meet the following specialized experience:Specialized Experience: Specialized Experience is experience that has equipped the applicant with the knowledge, skills, and abilities to successfully perform the duties of the position, and that is typically in or related to the work of the position to be filled.

At the GS-14: Applicants must have at least 52 weeks of Specialized Experience equivalent to the GS-13 or higher, to qualify for this position. For this position, specialized experience is defined as:

• Using OSHA regulations, American National Standards Institute (ANSI) or similar recommended standards and procedures for testing and/or calibration of electronic systems.
• Developing innovative methods and techniques for evaluating hazards involving unusual or new work processes, operations, equipment and/or materials.
• Providing technical assistance/guidance in conducting studies and investigations of hazards and accidents.
• Performing forensic investigations for industrial accidents and catastrophes by providing engineering support to address industrial hygiene issues.

NOTE: In describing your experience, please be clear and specific. We will not make assumptions regarding your experience.

Education

Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.

If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum course work requirements for this position.

Click Evaluation of Foreign Education for more information.

Additional information

This position is being filled through the Direct Hire Authority. Traditional rating and ranking of applications does NOT apply. Veterans' preference does not apply.

Click here for Telework Position Information. This is not a remote work position. The selectee will report to an assigned DOL office location on a regular basis and is eligible for participation in telework as determined by management in accordance with DOL policy.

Based on agency needs, additional positions may be filled using this vacancy.

The Department of Labor may use certain incentives and hiring flexibilities, currently offered by the Federal government to attract highly qualified candidates. Click here for Additional Information.

The Fair Chance Act (FCA) prohibits Federal agencies from requesting an applicant's criminal history information before the agency makes a conditional offer of employment. If you believe a DOL employee has violated your rights under the FCA, you may file a complaint of the alleged violation following our agency's complaint process Guidelines for Reporting Violations of the Fair Chance Act.

Note: The FCA does not apply to some positions specified under the Act, such as law enforcement or national security positions.

Expand Hide additional information

Benefits

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.