Mechanical Engineer

Summary

This position is in Grand Coulee Power Office of the Bureau of Reclamation (Reclamation), within the Department of the Interior (Department). The incumbent serves as an experienced mechanical engineer, providing mentorship and technical expertise for a variety of complex projects and activities at Grand Coulee Dam, the nation's largest hydropower facility, and the source of water for the Columbia Basin Project, serving irrigation water to more than 670,000 acres in Eastern Washington State.

Duties

Help

Mechanical Engineers play a critical role in maintenance, operation and projects at Grand Coulee Dam, below are some of duties you will perform:

• Assist with or provides input for preparation of plans, specifications and engineering estimates covering repairs, maintenance and improvements of the turbines and related equipment used for hydro-electric generation at Grand Coulee Dam.
• Participate in and assists with the preparation of preliminary design studies, design memoranda, final design calculations and plans, technical specification provisions and labor and material estimates.
• Review mechanical portions of engineering designs to identify potential deficiencies and discrepancies; prepares comments and recommendation for the correction of designs.
• Prepare drawings of proposed or as built conditions of projects engaged with.
• Engage in substantial rotational tours of duty at GCPO facility (Engineering Design, O&M Engineering, Construction, and Operations) and other Region facilities. Participate in classroom and on the job training presented through work details to various facilities at GCPO.
• Test powerplant equipment, presenting and sharing test results, and preparing reports of findings.

Duties will be developmental in nature when filled below the full performance level.

This is an open continuous vacancy announcement. The first cut-off date is 11:59 pm ET, 10/20/2026. Initial consideration will be given to candidates whose applications meet all qualification and/or eligibility requirements and are received by the first cut-off date. Applicants will be referred periodically throughout the announcement period. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement.

Requirements

Help

Conditions of employment

• Must be a U.S. Citizen or National.
• Appointment subject to background investigation and favorable adjudication.
• Males born after 12-31-59 must be registered for Selective Service.
• Direct Deposit participation required.
• Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/.
• You are required to complete training, obtain and maintain a government credit card with travel and purchase authority.
• You must be at least (1)18 years old or (2) at least 16 years old and: (a) Have graduated from high school or been awarded a certificate equivalent to graduating from high school; or (b) Have completed a formal vocational training program; or (c) Have received a statement from school authorities agreeing with their preference for employment rather than continuing their education; or (d) Be currently enrolled in a secondary school and either work only during school vacation periods or work part-time during the school year under a formal student employment program.
• Certification and/or training to serve as a Federal Acquisition Certification (FAC) Contracting Officer's Representative (COR) or Grants Officer's Technical Representative (GOTR) may be required as articulated in Department and/or Reclamation policies depending on assignment.

As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which your fitness and whether your continued employment advances the public interest will be evaluated.

This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider:

• your performance and conduct;
• the needs and interests of the agency;
• whether your continued employment would advance organizational goals of the agency or the Government; and
• whether your continued employment would advance the efficiency of the Federal service.

*Additional Requirements located under qualifications*

Qualifications

Requirements Continued...

Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated.

Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

This is a supervisory position that may require completion of a supervisory probationary period.

Qualifications:

This is an open continuous announcement in which applications are accepted over several months and reviewed according to multiple cut-off dates. Applicants who apply by the initial cut-off date will receive first consideration. The first cut-off date is 11:59 pm ET, 10/20/2026. Applicants will have 5 days to complete the required USA Hire Assessment after receiving the assessment notice. Applications will continue to be reviewed throughout the open period; however, additional referral certificates will only be issued when a hiring official has exhausted a current certificate and/or when additional vacancies arise. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement.

All qualifications must be met by the closing date of this announcement-01/06/2027-unless otherwise stated in this vacancy announcement.

To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected.

Minimum Qualification Requirements: To be considered qualified for this position, you must first meet the basic education requirements for the series. In addition, the HR Office must be able to clearly determine from your resume that you meet the specialized experience requirements. Be sure your resume fully and explicitly supports the specialized experience you claim

Basic Educational Requirements:

Successfully completed a bachelor's or higher degree in Engineering in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET).

OR

Successfully completed a bachelor's or higher degree in Engineering that included differential and integral calculus and courses (more advanced than first year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

A combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

AND

Note: The GS-5 has no additional qualification requirement beyond the IOR

To qualify at the GS-07: you must possess one year of specialized experience equivalent in difficulty and complexity to at least the GS-05 level in federal service having demonstrated experience with Mechanical Engineering theories, principles, and practices working with electrical power, communication, and control drawings. Other applicable experience that included industrial systems and electrical work on large facilities.

Substitution of Education for the Specialized Experience Requirement:

For GS-07: Successful completion of 1 year (18 semester hours) graduate-level education directly related to the position;

**OR**

Superior Academic Achievement (SAA): Successfully completed a bachelor's degree in a directly related field AND meet one of the following: (1) Class Standing: rank in the upper 3rd of the graduating class in the college, university, or major subdivision, based on the completed courses; OR (2) Grade-Point Average (GPA): earn a GPA of (a) 3.0 or higher out of a possible 4.0 ("B" or better) based on 4 years of education, or based on courses completed during the final 2 years of the curriculum -or- (b) 3.5 or higher out of a possible 4.0 ("B" or better) based on the average of the required courses completed in the major field, or the required courses completed during the final two years. Note: GPA will be rounded to one decimal place, for example, 2.95 = 3.0, 2.94 = 2.9; OR (3) Membership in a National Scholastic Honor Society.

Education

Qualifications continued....

Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

This position has a mandatory education requirement.

You must submit a copy of your transcript(s) to support claimed education if substituting education for experience. Transcripts must include your name, school name, grades, credit hours earned, major(s), grade point average or class ranking, and date the degree was conferred, if applicable. A typed list of courses, grades, semester/quarter hours, GPA, etc. will not be accepted. Non-submission may result in being rated not qualified for the position. Unofficial transcripts are acceptable, but if you are selected for this position and you used your education to qualify, you must provide official transcripts before you begin work.

Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. Recognition of Foreign Qualifications | U.S. Department of Education. https://www.ed.gov/about/initiatives/international-affairs/recognition-of-foreign-qualification

Additional information

Additional vacancies may be filled using this job announcement.

Promotion to t