The Product Engineering TeamProduct Engineering builds the power and cooling systems that let Fluidstack deliver gigawatt-scale AI data centers faster and denser than the grid-standard supply chain allows. The SST group is designing solid-state transformers as a core building block of that power architecture.
Examples of key problems the team is working on- Architect a medium-voltage solid-state transformer that can be manufactured, serviced, and scaled across gigawatt-scale campuses, not just demonstrated in a lab.
- Define the interface between the SST and the MVDC distribution system, including protection, control boundaries, and fault behavior.
- Build a semiconductor and magnetics supply strategy that survives a thin 10kV SiC market over a multi-year horizon.
- Take converter hardware from topology selection through working prototypes on a schedule that data center construction actually depends on.
Role Scope- Design the mechanical and thermal architecture of the SST block: enclosure, busbars, cold plates, coolant loops, and a layout that fits megawatts of power electronics into a few cubic meters.
- Get heat out of high-voltage parts, including transformers cooled through their insulation, while holding every creepage and clearance distance at tens of kilovolts.
- Size the liquid cooling (glycol loops, heat exchangers, dielectric secondary loops) and close the thermal budget against measured losses at full power.
- Design for manufacture, service, and transport: modules a technician can swap, enclosures rated for outdoor sites, and assemblies a contract manufacturer can build thousands of times.
- Hand off drawings, tolerances, and test fixtures to suppliers, the test lab, and the certification body.
What We're Looking ForThe below is a starting point. We always make space for exceptional people, so if you don't fit this role exactly, tell us where you would.- You've designed the enclosure and cooling for high-power converters (MV drives, inverters, SSTs, traction, or EV fast chargers) and shipped them.
- You've laid out high-voltage busbars and conductors to meet creepage and clearance rules in a tight volume.
- You've built liquid cooling for power electronics, from cold plates to heat exchangers, and matched your thermal models to test data.
- You've designed parts for volume manufacture with a contract manufacturer and fixed what broke on the line.
- You've designed hardware for outdoor or industrial sites: dust, humidity, vibration, and shipping loads.
- Bonus: Thermal and flow simulation (CFD, Ansys Icepak, COMSOL). Mechanical CAD (SolidWorks, Creo, NX). Insulation coordination standards (IEC 60664, UL 840). Enclosure ratings (NEMA, IP). Design for manufacture and assembly (DFM, DFA).
We are committed to pay equity and transparency.
