ABOUT THE ROLE:Join the High Power Engineering team supporting SpaceXAI to design, build, operate, and maintain electrical infrastructure for AI training campuses. As a Lead Engineer for Battery Storage, you will work with a small on-site team to scale high-capacity power systems on a schedule set by compute demand. The position is based in Memphis, TN, with potential travel to other sites.
RESPONSIBILITIES:- Own the storage fleet as a power plant, not as an accessory: architecture, sizing, controls, safety case, and grid-forming behavior that lets the campus ride through compute step loads and generation contingencies.
- Own BESS architecture: pack-to-MV-transformer grouping, string composition, medium-voltage collection topology, string-level protection, and physical block layout including spacing per NFPA 855.
- Own sizing; translate compute duty cycles - step loads, training-job ramps, actual-versus-nameplate utilization - into power and energy requirements.
- Own inverter control strategy: grid-forming versus grid-following, droop and virtual inertia, fault-current contribution, ride-through, and coordination with generation governors and excitation.
- Own the plant controller and EMS functional specification: dispatch, state-of-charge management, peak shaving, spinning-reserve emulation, islanding, and black-start participation.
- Own the fire and life-safety case: UL 9540 and 9540A basis, thermal runaway propagation, deflagration venting, water supply, emergency response plan, and AHJ engagement.
- Own the OEM relationship: technical requirements, factory testing, performance guarantees, and degradation and augmentation planning.
- Direct Design, Commissioning, Ops/Build, Network, Civil, and Program Manager seats on Battery Storage as those seats fill.
BASIC QUALIFICATIONS:- Bachelor's degree in electrical engineering, computer engineering, physics, or another engineering discipline.
- 8+ years in power systems engineering.
- 4+ years directly on utility-scale or large commercial and industrial battery energy storage.
PREFERRED SKILLS AND EXPERIENCES:- Experience sizing storage against a real duty cycle rather than a rule of thumb.
- Working knowledge of NFPA 855, UL 9540 and 9540A, IEEE 1547, and IEEE 2800.
- Utility-scale BESS fleet experience at large pack counts.
- Deep understanding of grid-forming inverter control and its interaction with synchronous machines.
- PSCAD or other EMT modeling of inverter-based resources.
- Professional Engineering license or intention to actively seek a PE license.
- Experience building and leading an engineering team from the first hire.
ADDITIONAL REQUIREMENTS:- Perform hands-on work in all environments (heat, cold, rain), in tight quarters or at heights.
- Work extended hours and weekends as needed to support construction, energization, and operations.
- Remain focused in hazardous environments while wearing appropriate PPE.
- Lift up to 25 lbs. unassisted.
- Provide 24/7 on-call support for emergencies.
- Willing to work on-site in Memphis, TN. This is not a remote or hybrid role.
- Travel up to 25% for factory witness testing, vendor and OEM engagement, and supporting other sites.
- Valid driver's license.
