Salary: $86,195.20 - $166,441.60 Annually
Location : 6450 York St., Denver, CO
Job Type: Full time
Job Number: 2241_MULTI_092026
Department: Technology & Innovation
Division: Wastewater Process Engineering
Opening Date: 10/01/2026
Closing Date: 10/18/2026 11:59 PM Mountain
DescriptionThis position will be filled at one of the following levels depending upon the candidate's qualifications:
Associate Wastewater Process Engineer ($86,195.20 - $120,265.60 Annually)Responsible for performing a variety of entry-level wastewater process engineering activities related to the planning, study, design, and operation of water resource recovery facilities. The Engineer Associate may assist in and perform bench, pilot, and/or full-scale testing and may also conduct applied research to evaluate new and emerging technologies. This position reports to a Principal Engineer or the Senior Wastewater Process Engineering Manager in the Technology & Innovation Department.
Staff Wastewater Process Engineer ($98,134.40 - $142,708.80 Annually)Responsible for conducting wastewater process engineering activities related to the planning, design, implementation, and optimization of conventional and advanced treatment processes and innovative technologies. The Staff Engineer will perform and coordinate bench, pilot, and/or full-scale testing and may also conduct applied research. May function as a task manager or focus area leader. This position reports to a Principal Engineer or the Senior Wastewater Process Engineering Manager in the Technology & Innovation Department.
Senior Wastewater Process Engineer ($114,483.20 - $166,441.60 Annually)Responsible for leading wastewater process engineering activities, with a focus on coordinating efforts associated with planning, design, implementation, and optimization of conventional and advanced treatment processes and innovative technologies. The Senior Engineer plans and conducts work requiring independent judgment in the evaluation, selection, substantial adaptation and modification of standard techniques, procedures, technologies, processes, and bench and full-scale pilot tests. May function as a project or technical manager or focus area lead. Independently performs most assignments based on information received from management as to the general results expected. This position reports to a Principal Engineer or the Senior Wastewater Process Engineering Manager in the Technology & Innovation Department.
Examples of DutiesThis position is being posted at multiple levels. For Typical Duties, please select the appropriate job description below and wait for pop-up on the right of the screen.
Associate Wastewater Process EngineerStaff Wastewater Process EngineerSenior Wastewater Process Engineer Qualifications Associate Wastewater Process Engineer: Knowledge/Skills/AbilitiesKnowledge of:- Basic engineering principles and fundamentals, including mass and energy balances, fluid mechanics, biological processes, and chemical reactions.
- Advanced data analytical tools and methods for wastewater process data.
- Biological process modeling utilizing tools such as BioWin, GPS-X, Sumo, SIMBA, or WEST.
- Understanding of laboratory water quality analytical methods.
- Best practices related to the execution of applied research.
Skilled at:- Critical thinking and analytical problem-solving.
- Critically analyzing process data to provide recommendations for operational improvements.
- Effectively communicating and understanding technical information across multi-disciplinary teams.
- Using Microsoft Office Suite, with emphasis on Excel and data visualization tools like Power BI.
- Writing and verbal communication, particularly for technical reports and presentations.
Ability to:- Contribute to engineering projects from conception to completion, ensuring alignment with organizational goals and objectives.
- Review and comment on engineering studies and designs prepared by staff and/or engineering consultants.
- Develop workflows to efficiently address and resolve engineering problems.
- Read and understand academic and technical papers, synthesizing their findings, and applying their content to practical process challenges.
- Analyze plant process data and provide recommendations to optimize operational performance.
- Ability to establish and maintain effective working relationships.
Education, License, and CertificationMaster's degree in civil, environmental, chemical, mechanical, or other related engineering discipline from an accredited college or university. A combination of education and relevant experience may be considered in lieu of a degree.
Staff Wastewater Process Engineer:Knowledge/Skills/AbilitiesKnowledge of:- Intermediate engineering principles and fundamentals, including mass and energy balances, fluid mechanics, biological processes and kinetics, and chemical reactions.
- Conventional and advanced municipal wastewater treatment systems and processes including conceptual and detailed design, optimization, and performance analysis.
- Biological, physical, and chemical process modeling utilizing tools. Understanding of laboratory chemical, biochemical or microbiological analysis methods.
- Current and future regulatory requirements, industry standards, and best practices related to the development and implementation of innovative technologies.
- Basic project management principles and practices, including project planning, execution, and risk management.
Skilled at:- Problem-solving and analytical thinking, with the ability to conceptualize and implement creative solutions to complex technical challenges.
- Review of physical, biological, and chemical processes to maximize wastewater process operation efficiency and meet permit requirements.
- Effectively conveying technical concepts and findings to both technical and non-technical audiences
- Experience with platforms including Microsoft Office Suite, with emphasis on Excel, Power BI, or other data analytics and data visualization packages.
- Experience with hydraulic, energy and heat balances, lifecycle cost analysis models, and/or biological process modeling (e.g., BioWin, GPS-X, Sumo, SIMBA, or WEST).
- Adaptability and flexibility, with the ability to thrive in a dynamic and fast-paced environment, managing multiple priorities and deadlines concurrently.
Ability to:- Execute engineering projects from conception to completion, ensuring alignment with organizational goals and objectives.
- Prepare, review, and critique engineering studies, reports, proposals, presentations, and design documents prepared by staff and/or engineering consultants.
- Read and understand academic and technical papers and apply their content to practical process challenges. Network and collaborate with peer technologists to exchange knowledge.
- Analyze plant process data and provides recommendations to optimization operational performance while minimizing life-cycle costs.
- Ability to establish and maintain effective working relationships with employees, consultants, contractors, and the public.
- Innovate and think creatively, exploring new ideas and approaches to solve technical challenges and drive continuous improvement.
Education, License, and CertificationMaster's degree or equivalency in civil, environmental, chemical, mechanical, or other related engineering discipline from an accredited college or university. Enrolled as an Engineer Intern (EI) in the State of Colorado or equivalent designation in another jurisdiction.
Senior Wastewater Process Engineer: Knowledge/Skills/AbilitiesKnowledge of:- Advanced engineering principles and fundamentals, including mass and energy balances, fluid mechanics, process controls, biological processes and kinetics and chemical reactions. Understanding of laboratory chemical, biochemical or microbiological analyses, wastewater operations, environmental science, or technology discipline.
- Municipal wastewater treatment systems and processes including design, optimization, performance analysis, biosolids land application strategies, energy optimization, and operational and compliance strategies.
- Basic and advanced biological, physical, and chemical process modeling utilizing tools, their strengths and limitations. Basic and advanced laboratory chemical, biochemical or microbiological analysis methods.
- Current and future regulatory requirements, industry standards, policies, and best practices related to the testing, development and implementation of innovative technologies. Knowledge of NPDES permit regulations and requirements.
- Intermediate principles and practices of project development and planning, execution, scheduling, and risk management.
Skilled at:- Problem-solving and analytical thinking, with the ability to devise creative solutions to complex technical challenges.
- Troubleshooting treatment processes based on the review of physical, biological, and chemical process data to maximize wastewater process operation efficiency and reduce permit compliance risk.
- Communication and interpersonal skills, adept at conveying technical concepts to diverse audiences and building consensus among stakeholders.
- Experience with computer software including Microsoft Office Suite, hydraulic/process modeling, databases and big data analytics, and data visualization using packages such as Power BI, PiVision, etc.
- Engineering design, project management and/or facility planning. Experience with hydraulic, energy and heat balances, lifecycle cost analysis models, and/or biological process modeling (e.g., BioWin, GPS-X, Sumo, SIMBA, or WEST).
- Adaptability and flexibility, adept at managing multiple priorities in a dynamic environment.
- Leadership and teamwork, with a proven ability to lead cross-functional teams and drive results collaboratively.
Ability to:- Lead complex engineering projects from conception to completion, ensuring alignment with organizational goals and objectives.
- Prepare, review, and critique engineering studies, reports, proposals, presentations, and design documents prepared by staff and/or engineering consultants.
- Develop and implement systematic, stepwise workflows to efficiently address and resolve complex engineering problems, ensuring robust and comprehensive solutions.
- Critically evaluate academic and technical papers, synthesize their findings, and apply advanced concepts to practical and innovative process engineering challenges. Network and collaborate with peer technologists to exchange knowledge.
- Independently analyze plant process data and provide recommendations to optimize operational performance while minimizing life-cycle costs.
- Ability to establish and maintain effective working relationships with employees, consultants, contractors, and the public. Networks and collaborates with peer technologists to exchange knowledge.
- Innovate and think creatively; foster a culture of innovation and learning within the team, encouraging experimentation, knowledge sharing, and continuous professional development.
Education, License, and CertificationMaster's degree in civil, environmental, chemical, mechanical, or other related engineering discipline from an accredited college or university. Registered as a Professional Engineer (PE) in the State of Colorado or equivalent license in another jurisdiction. If registered as a PE in another state, must apply for PE reciprocity in Colorado.
Working Conditions Typical Work Environment Variety of floor surfaces including concrete, gravel, asphalt, dirt, tile, loose stones, uneven surfaces, slippery surfaces, and wet surfaces; Inside environment; Outside environment all year in all weather conditions and temperatures; Residential and Commercial Wastewater/Biosolids; Chemicals; Lighting conditions including natural light, fluorescent, head lamps, incandescent, and low light; and low light; Vibration; Moving equipment; Work in confined spaces
Body Position DemandsStanding; Walking; Climbing stairs; Climbing ladders; Reaching forward and overhead; Balancing; Object handling; Simple hand/ Firm hand grasping; Operating controls; Sitting; Stooping; Kneeling; Crouching; Crawling; Typing; Fine hand coordination
Physical Demands (max forces are expected to be infrequent)
Max Weight Lifted: 50 lbs
Max Weight Carried: 50 lbs
Max Force Pushed: 94 lbs
Max Force Pulled: 100 lbs
Sensory RequirementsWide field of view; Perception - Spatial; Olfactory (Smelling); Vision - Near; Depth perception; Color discrimination; Perception - Form; Feeling without seeing; Speaking; Vision - near and far; Hearing
Metro Water Recovery offers a wide range of employee benefits including:
* Medical
* Dental
* Vision
* Life Insurance
* Accidental Death & Dismemberment Insurance
* Retirement
* Leave Time (Vac
