Summary

This position is located at Bureau of Engraving and Printing, within the Equipment Engineering Division DCF (Washington, DC). As a Supervisory General Engineer, you will manage a staff of engineers supporting the 2 BEP manufacturing facilities. You will have experience in product or process development in a factory environment, manage interdisciplinary project teams, and possess an excellent analytical and systematic problem-solving skillset. You must be able to develop technical resources.

Duties

Help

As a Supervisory General Engineer, you will:

• Supervise personnel, track and report to senior management the status of acquisition and implementation of new equipment, processes, and systems.
• Provide technical leadership and manage/mentor engineers in problem definition and solution using analytical, quantitative, and systematic problem-solving skills. This includes design of experiments and test plans to verify the problem solution.
• Perform a full range of supervisory and managerial duties typical of first level supervisors in BEP.
• Oversee a staff of General, Electrical, and/or Mechanical Engineers.

Requirements

Help

Conditions of employment

• All newly appointed employees to the competitive (or excepted) service are subject to a probationary (or trial) period. During this time, your performance, conduct, and suitability for continued employment will be evaluated. You will not automatically convert to permanent status at the end of the probationary (or trial) period. Your supervisor must affirmatively determine that continued employment is in the best interest of the Federal service. If no certification is made before the probationary (or trial) period ends, your appointment will be terminated. You are encouraged to actively engage with your supervisor, seek feedback, and understand role expectations. Additional guidance and support will be provided during onboarding.
• A one-year supervisory or managerial probationary period may be required.
• Public Trust - Background Investigation will be required.
• Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency.
• Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer.
• Undergo a tax compliance review.
• If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so.
• Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form I-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S.
• Obtain and use a government-issued charge card for business-related travel.
• File a Confidential Financial Disclosure Report within 30 days of appointment and annually from then on.
• You may be required to undergo an income tax verification.
• Submit to a drug test prior to your appointment and random drug testing while you occupy the position.
• Weekend work and overtime, if applicable, will be scheduled when needed based on production requirements as determined by Management.

Key Requirements:

1. Click "Print Preview" to review the entire announcement before applying.
2. Must be U.S. Citizen or U.S. National

Qualifications

You must meet the following requirements by the closing date of this announcement.

For the GS-14, you must have one year of specialized experience at a level of difficulty and responsibility equivalent to the GS-13 grade level in the Federal service.

Specialized experience for this position includes:

- Leading engineering teams on technical projects to meet tactical and strategic needs or leading interdisciplinary project teams; AND

- Solving product, process, or technology issues by applying structured problem solving techniques (e.g., root-cause analysis).

Education

Education Requirements:

The education generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency. Refer to the OPM instructions.

A. Degree: Engineering.

To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

You must meet the minimum basic educational and/or work experience requirements for professional engineering positions in the federal government.

Additional information

The Bureau of Engraving and Printing has partnered with the Treasury Common Services Center (TCSC) to provide certain personnel services to its organization. TCSC's responsibilities include advertising vacancies, accepting and handling applications, and extending job offers.

• We may select from this announcement or any other source to fill one or more vacancies.
• This is a non-bargaining unit position.
• We offer opportunities for telework as determined by agency policy.
• We offer opportunities for flexible work schedules.
• The facility typically shuts down annually between Christmas and New Year's Day. As such, all BEP employees must take leave for workdays during the shutdown period.
• This position requires that the successful candidate undergo personnel vetting, which includes a background investigation and enrollment upon onboarding into "Continuous Vetting." Enrollment in Continuous Vetting will result in automated record checks being conducted throughout one's employment with Treasury. The successful candidate will also be enrolled into FBI's Rap Back service, which will allow Treasury to receive notification from the FBI of criminal matters (e.g., arrests, charges, convictions) involving enrolled individuals in near real-time. For more information about individual rights, Noncriminal Justice Applicant's Privacy Rights - FBI, FD-258 Privacy Act Statement - FBI, and SEAD-3-Reporting-U.pdf (dni.gov).
• SUITABILITY, CLEARANCE & REQUIREMENTS: A background investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by the Bureau of Engraving and Printing is very thorough. Therefore, it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination or immediate revocation of your interim clearance (if applicable).

Expand Hide additional information

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Our comprehensive benefits are very generous. Our benefits package includes:

• Challenging work, opportunities for advancement, competitive salaries, bonuses and incentive awards.
• Eleven paid holidays, 13 days of sick leave, and 13 to 26 days of vacation time each year.
• Access to insurance programs that may be continued after you retire.
• A wide choice of health insurance plans, coverage for pre-existing conditions, and no waiting periods. We pay a substantial amount (up to 75%) of the health insurance premiums.
• Public Transportation Incentives and reserved parking available for Washington DC positions.
• A retirement program which includes employer-matching contributions.
• Learn more about Federal benefits programs at: https://help.usajobs.gov/working-in-government/benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.