Description

Job Title Project Engineer- Cooling Tower/Water System (Engineer 2/3)

Location Los Alamos, NM, US

Organization Name MSS-MP/Maintenance Programs

Minimum Salary

Maximum Salary

This position is open for external candidates only to apply.
What You Will Do

This position will be filled at either the Engineer 2/3 level, depending upon the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.

Los Alamos National Laboratory (LANL) is seeking an experienced Water Treatment subject matter expert (SME) to support the Maintenance and Site Services - Maintenance Programs (MSS-MP) group. As our selected candidate, you will have a strong mechanical background and will perform periodic inspections, evaluations, designs, and provide recommendations of water related systems at LANL. You will be deployed to MSS-MP, will be responsible for LANL's cooling towers, chillers, water circulation systems and other similar programs, and will assist the Group Lead (GL) as needed.

Engineer 2 ($106,400-$176,000)

The successful candidate will be expected to perform the duties of this position which include, but are not limited to:

HVAC/Plumbing Systems:

• Advise on HVAC, plumbing buildings systems, cooling and heating water systems and infrastructure systems.
• Interpret water analysis to provide water treatment recommendations.
• Design/Analysis/Reporting.
• Present sustainable design measures, e.g. ASHRAE 90.1, LEED, and LANL HPSB.
• Assist project engineering with writing Requirements and Criteria Documents.
• Support the MSS department in the review, revision and development of maintenance related documents such as Operations and Maintenance documentation (O&M) and Preventive Maintenance Instructions (PMI).

Safety

• Review Engineering Evaluations of existing equipment and systems for performance, safety, and deficiencies.
• Coordinate with EPC, IH, Health and Safety, Fire Protection and other to accomplish project goals.

Leadership

• Demonstrate the capacity to work with different vendors, contractors, and facility operations and maintenance groups to accomplish objective goals.
• Interface and coordinate with other engineering disciplines, the Project Engineer, and the customer during all stages of planning, design and construction.

Engineer 3 ($117,200-$195,400)

In addition to what was outlined at the lower level, at this level this position will:

HVAC/Plumbing Systems

• Advise as a Subject Matter Expert (SME) on HVAC, plumbing buildings systems, cooling and heating water systems and infrastructure systems.
• Establish design criteria for buildings and Infrastructure HVAC and plumbing systems.
• Design, evaluate, and upgrade facility HVAC and plumbing systems.
• Manage and interpret water analysis to provide water treatment recommendations.

Design/Analysis/Reporting:

• Apply and enforce sustainable design measures, e.g. ASHRAE 90.1, LEED, and LANL HPSB.
• Prepare and interpret life cycle cost analyses.
• Provide technical reviews of buildings and infrastructure systems designs from LANL and outside A/E firms.
• Assist project engineering with writing Requirements and Criteria Documents.
• Perform code searches, and apply DOE Orders, appropriate codes, standards and guidelines.
• Prepare technical reports and studies.
• Collect the requirements for the system, process, and components design or analysis task, and then prepare design concepts that meet the requirements.
• Develop design details, design or analysis calculations, specifications, pressure safety documentation, P&IDs, etc. that incorporate the applicable design and national code requirements, including nuclear safety requirements, as applicable.
• Communicate and push for needed projects or efforts by providing cost comparisons, data interpretation, high level schedules or other relevant documentation.
• Support the MSS department in the review, revision and development of maintenance related documents such as Operations and Maintenance documentation (O&M), Preventive Maintenance Instructions (PMI) and other.

Safety:

• Support the associated safety analyses and hazards evaluations.
• Perform Engineering Evaluations of existing equipment and systems for performance, safety, and deficiencies.
• Demonstrate a solid understanding of industry codes and standards, e.g. ASME, ASTM, UMC, UPC Codes and Standards.
• Coordinate with EPC, IH, Health and Safety, Fire Protection and other groups to accomplish project goals.

Leadership:

• Provide technical leadership and mentoring to early career mechanical engineers.
• Demonstrate the capacity to work with different vendors, contractors, and facility operations and maintenance groups to accomplish objective goals.
• Interface and coordinate with other engineering disciplines, the Project Engineer, and the customer during all stages of planning, design and construction.

What You Need

Minimum Job Requirements:

• Experience with buildings and infrastructure including mechanical and plumbing systems; engineering work planning and design coordination; using ASME B31 family of codes (PSO Areas A certification encouraged); using Uniform Mechanical and Plumbing codes; facilities (HVAC) design experience; nuclear related HVAC design experience.
• Experience conducting independent work requiring judgment in the application of engineering techniques, with projects in scoping, design, construction, change management, and engagement with field personnel or a combination of experience in; reviewing design drawings for project development e.g. P&ID, PFD, mechanical, instrumentation and other; requesting and reviewing equipment quotes related to water analysis and water treatment; coordinating with EPC, Health and Safety, Industrial Hygiene, Fire Protection, and other departments to accomplish project goals.
• Demonstrated knowledge of International Building Code, and International Existing Building Code, International Energy Conservation Code; DOE standards applicable to non-reactor facility design, operation, and maintenance; experience managing system evaluation and data interpretation (water analysis) to provide water treatment recommendations; experience supporting maintenance and construction activities to ensure the project success; ability to articulate concepts through various oral and written communication media, using a diverse range of technical and business acumen; ability to apply critical thinking in complex problem solving, present options, and make recommendations.
• Working knowledge of mechanical software, analysis tools (e.g. Matlab, Mathcad, Fathom), and proficiency with personal computers and Microsoft Office software suite (including Excel, Word, Outlook, and PowerPoint).

Additional Job Requirements for Engineer 3:
In addition to the requirements outlined above, qualification at the higher level requires:

• Experience in HVAC design.
• Experience in nuclear related HVAC design experience.
• Demonstrated/recognized expertise in HVAC and/or thermal and fluid systems.
• Demonstrate expertise with finite element analysis software to solve engineering challenges.

Education/Experience for Engineer 2 level: Position requires a Bachelor's Degree in Engineering and a minimum of 3 years practical work experience to the degree necessary to perform the responsibilities outlined above.

Education/Experience for Engineer 3: Position requires a Bachelor's Degree in Engineering and a minimum of 6 years practical work experience to the degree necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired.

Desired Qualifications:

• Familiarity of LANL Conduct of Engineering (COE), LANL Quality policies and procedures.
• Mechanical professional engineering license (through NCEES for any U.S. state or territory).
• Basic Microsoft Office software Access and Visio or Primavera P6 software.
• Project Management Professional (PMP) certification.

Work Location: The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management.

Position Commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.

Note to Applicants:

• Applicants should submit a cover letter addressing the requirements of the position along with their resume.
• Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory.

Contact Details

Contact Name Jacquez, Timothy

Email [email protected]

Work Telephone