Summary

You will serve as the INSTALLATION ENVIRONMENTAL PROGRAM DIRECTOR (Supervisory Interdisciplinary) in the Environmental Division of NAVWPNSTA SEAL BEACH.

Duties

Help

• You will plan, develop, and implement a broad environmental protection program ensuring environmental compliance in all environmental media for FEC regional installations that comprise the Installation Command.
• You will implement environmental policy and provide environmental program management support to the regional installations, tenants, and operational units.
• You will ensure compliance with all applicable federal, state, and local environmental regulations.
• You will provide advice, counsel, or guidance to employees on both work and administrative matters.
• You will plan work to be accomplished by subordinate staff, set and adjust short-term priorities, and schedule work completion.

Qualifications

Selective Placement Factor (SPF) for the Environmental Engineer (0819) series: If you are applying for this position as an Environmental Engineer, you must be currently registered as a Professional Engineer (PE) from any state, the District of Columbia, Guam, or Puerto Rico. ***NOTE: A copy of your current license/registration showing the expiration date MUST be submitted with your application in order to be considered for this position. A copy of a wall certificate that does not have an expiration date will not serve to verify this requirement.

In addition to the Basic Education Requirements and Selective Placement Factor (for 0189 series), your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Reviewing construction projects and operational/training programs in accordance with the National Environmental Policy Act for compliance with environmental requirements and agency policy; 2) Overseeing the environmental compliance program for an organization and managing environmental compliance permits; 3) Managing environmental programs by planning, scheduling, budgeting, and coordinating cost-effective solutions to meet requirements; 4) Assuring sound stewardship of natural, cultural, and historic resources; and 5) Coordinating with counterparts internally and externally, setting team priorities, and communicating priorities and short- and long-term objectives to senior leadership. ***NOTE: This experience must be fully and clearly supported in your resume.

Additional qualification information can be found from the following Office of Personnel Management website:

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series

0401 series: General Natural Resources Management and Biological Sciences Series 0401 (opm.gov)

0819 series: Environmental Engineering Series 0819 (opm.gov)

1301 series: General Physical Science Series, 1301 (opm.gov)

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:

Basic education requirement for the GS-0401, Professional Biological Science Series:

Have a degree in biological sciences, agriculture, natural resource management, chemistry, or a related discipline appropriate to this position.

OR

Have a combination of education and experience in one of the above majors that includes at least 24 semester hours in biological sciences, agriculture, natural resource management, chemistry, or a discipline related to this position plus appropriate experience or additional education. The quality of the combination of education and experience demonstrates that I possess the knowledge, skills, and abilities required to perform the work of the position and is comparable to that normally acquired through the completion of a full four year course of study with a major as described above.

Basic education requirement for the GS-0819, Professional Environmental Engineering Series:

Have successfully completed a bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above); or (IV) Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Basic education requirement for the GS-1301, Professional Physical Science Series:

Have successfully completed a bachelor's degree or higher in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.

OR

Have a combination of education and experience with education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/

Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

Expand Hide additional information

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefi