Job Posting End Date09-12-2026
Please note the job posting will close on the day before the posting end date.
Job Summary The Mechanical Engineer Principal will support gas, coal, and renewable plant retrofit and new-generation self-build projects by defining mechanical design-basis expectations and supporting technical specifications, engineering, and procurement of rotating and static equipment, piping, structures, and balance-of-plant systems. A required focus of this role is advanced knowledge of natural gas simple cycle and combined cycle equipment, systems, and power plant configurations (combustion turbines, HRSG, steam turbines, balance-of-plant integration, heat recovery systems, and auxiliaries).
This role collaborates with Architect & Engineering (AE) and Engineer, Procure and Construct (EPC) firms and coordinates with internal and external stakeholders to ensure mechanical designs meet performance, reliability, constructability, safety, and regulatory requirements. The engineer will participate in RFx/OEM engagements, support self-build proposals, and provide construction, commissioning, and lifecycle support.
Job DescriptionMore Specific to This Opportunity:Key Responsibilities- Develop and document mechanical design basis and requirements for plant equipment, including turbines, generators, HRSGs/boilers, heat exchangers, pumps, compressors, cooling systems, piping, and structures.
- Apply advanced knowledge of simple and combined cycle gas turbine plants to equipment selection, system integration, and performance evaluations.
- Work with AE and EPC teams to review, comment on, and approve mechanical designs, drawings, and engineering calculations.
- Prepare and review technical and procurement specifications, scope documents for self-build proposals, and RFx deliverables.
- Interface with OEMs during RFx and procurement to confirm technical compliance, lead times, warranties, and vendor submittals.
- Support vendor evaluation and bid reviews, focusing on turbine/HRSG interfaces and steam cycle integration.
- Provide construction, commissioning, and startup support: site inspections, punch list resolution, and troubleshooting.
- Perform or review analyses as required (stress, vibration/rotor dynamics, thermal, piping flexibility, fatigue) to validate designs.
- Ensure compliance with applicable codes and standards (ASME, API, ANSI, NFPA, IEEE, local codes) and lead reliability/FMEA/RCM and obsolescence mitigation activities.
- Coordinate with electrical, I&C, civil, and operations stakeholders and support development of O&M documentation, spare parts lists, and lifecycle cost assessments.
- Promote safe design practices and ensure adherence to site-specific safety requirements.
Knowledge & Skills- Deep understanding of turbomachinery performance, rotor dynamics, vibration analysis, alignment, and balancing.
- Competence with piping stress analysis, pipe supports, and expansion management in high-temperature HRSG/steam systems.
- Ability to interpret and produce mechanical drawings, P&IDs, datasheets, and technical reports.
- Familiarity with welding practices, NDT, metallurgy basics, and fabrication processes.
- Experience with FEA and CFD tools and application to mechanical components is a plus.
- Knowledge of maintenance strategies, reliability engineering, and lifecycle cost analysis.
- Data analysis skills to monitor equipment health, enhance system performance, and inform reliability improvements.
- Proficiency in MS Access, Excel, Word, SQL, SharePoint, or Visual Basic is a plus.
- Strong communication skills for team collaboration.
Working Conditions- Approximately 25% travel, including day trips and overnight stays (up to a week or more).
- Work in both indoor and outdoor environments with exposure to heat, cold, noise, dust, fumes, and operating machinery.
- Mandatory safety gear required at generating stations: hard hat, eye/hearing protection, steel-toed shoes with heels and non-slip soles.
- Adherence to site-specific safety requirements is mandatory.
WHAT YOU'LL DO Technical Expertise: Exhibits advanced level proficiency plus advanced knowledge of a specialized technical area that enables the engineer to serve as a resource for the company in an area such as system production, underground systems, extensive control systems, thermo-hydraulic control systems, distribution standards, fossil or nuclear plant operations, etc.
Leadership & Guidance: Influences the direction of thinking throughout the organizational unit as a recognized authority in an area of expertise. Leads, facilitates and coordinates work activities of others within work group, team, department, corporate entity, or those external to the company and assumes the role of project or function manager for assigned tasks.
Planning & Organization Ability: Develops, recommends, and implements plans that include all scheduling, resource, and cost information and control required to address complex engineering problems that require the input and efforts of a wide array of entities both internal and external to the company.
Problem Solving & Initiative: Identifies, clarifies, resolves, and initiates solutions to complex problems that require multi-functional, or organizational, interfacing and/or multi-disciplined analytical techniques. Develops opportunities and new ideas and approaches that have system-wide impact.
Communication: Leads in the preparation and presentation of complex technical subjects, clearly, concisely, and persuasively, bringing in ancillary issues before senior management, professional organizations, regulatory bodies, etc. Projects credibility and competence on technical issues and has highly developed presentation skills.
Interpersonal Skills: Builds teams and networks that extend through AEP, and other companies, professional organizations, regulatory agencies, and academia. Networks throughout AEP, other companies, professional organizations, and regulatory agencies.
Decision Making: Possesses the experience and knowledge to make some technical decisions based on calculated risks without management review. Makes decisions affecting long range plans and goals based on analysis of highly uncertain input and outcomes. Visualizes long-term results. Makes decisions where differences of opinion are likely to exist. Makes decisions that have an impact across organizational boundaries.
Business Awareness & Characteristics: Demonstrates vision in identifying business opportunities for the organizational unit. Understands how strategies and decisions impact the relationship with our customers and suppliers.
WHAT WE'RE LOOKING FORHas typically acquired 8 or more years of related engineering experience along with a Bachelor's degree in engineering in a program accredited by ABET*; OR,
Six (6) years of related engineering experience along with a Master's or PhD in engineering from a program accredited by ABET*.
Registration as a Professional Engineer (PE) in any U.S. state or Puerto Rico** is preferred for this position unless approval to waive this requirement is given by the organization's EVP.*ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology.
Acceptable alternative is:
(1) a Bachelor's degree in engineering (non-ABET) plus a Master's degree or PhD in engineering from a university with an ABET accredited Bachelor's program.** Confirmation is preferred to ensure the PE obtained in Puerto Rico aligns with NCEES standards.
***VP or above may waive the requirement for a degree from a university with an Non ABET accredited program
Preferred Qualifications:- Bachelor's degree in Mechanical Engineering, Mechanical Engineering Technology, Energy Engineering, Energy Systems, or related Engineering discipline.
- Proven experience in mechanical engineering for power generation projects (gas, coal, and/or renewables).
- Advanced, hands-on knowledge of natural gas simple cycle and combined cycle plants, including combustion turbines, HRSGs, steam turbines, and auxiliary systems.
- Hands-on experience with rotating equipment, pressure systems, piping, pumps, valves, and structural/mechanical design.
- Familiarity with industry codes and standards (ASME Section I/II/VIII, API, etc.).
- Strong problem-solving and troubleshooting skills in complex industrial environments.
- Experience reviewing vendor drawings, technical specifications, and RFx responses.
- Proficiency with CAD and engineering calculation tools (AutoCAD, MicroStation, MathCAD, MATLAB, SolidWorks, PDMS/AVEVA, or equivalent) and engineering calculation practices.
- Experience working with gas, coal, and renewable energy projects.
- Experience with simple and combined cycle gas turbine projects, including plant integration and commissioning.
- Professional Engineering (PE) license or equivalent certifications.
- Familiarity with construction management, commissioning, and startup practices on utility-scale generation projects.
WHAT YOU'LL GETBase Salary: $117K - $151KIn addition to base salary, AEP offers competitive Total Rewards including: discretionary short-/long-term incentives, 401(k), pension, health insurance, vacation, educational assistance, etc. AMERICAN ELECTRIC POWER (on-site)
$117K - $151K / Year
#AEPCareers #LI-ONSITE
Compensation DataCompensation Grade:SP20-009
Compensation Range:$116,255.00 - $151,132.50
The Physical Demand Level for this job is: S - Sedentary Work: Exerting up to 10 pounds of force occasionally (Occasionally: activity or condition exists up to 1/3 of the time) and/or a negligible amount of force frequently. (Frequently: activity or condition exists from 1/3 to 2/3 of the time) to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met.
Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one.
