Fujifilm Manufacturing USA, Inc

Equipment Maintenance Technician - Front End Days (FED)

Fujifilm Manufacturing USA, Inc • $66K — $93K *
Santa Clara, CA 95051In-Person
Manufacturing & Automotive
Less than 5 years of experience
Reposted Today
Be an Early Applicant
Job Overview by Ladders

Qualifications

  • High school degree or equivalent with 4-6 years of related experience.
  • Experience with high vacuum equipment, lithography tools, wet benches, or measurement equipment.
  • Ability to troubleshoot and repair wafer fabrication and facilities equipment with minimal assistance.
  • Basic computer skills including Word, Excel, and Outlook.
  • Excellent verbal and written communication skills.

Responsibilities

  • Maintain wafer fabrication assembly and facilities equipment for production lines.
  • Troubleshoot and repair downed equipment; assist engineers in establishing maintenance protocols.
  • Schedule and coordinate with outside contractors for maintenance covered under service agreements.
  • Identify and implement preventive maintenance tasks to enhance equipment stability.
  • Utilize test and diagnostic equipment for troubleshooting and repairs.
  • Rebuild manufacturing equipment as necessary.
  • Train and guide other technicians and peers on processes and equipment maintenance.

Benefits

  • Generous benefits package.
  • Friendly and dynamic working environment.
Full Job Description
Job Description

Pay rate for position: $32.00 - $45.00 per hour, commensurate with experience.

This position schedule is considered a Compressed Work Week - Front End Days - Every Sunday, Monday, Tuesday, and every other Wednesday. 5:30 am - 6:00 pm

POSITION SUMMARY:

Equipment Maintenance Technician IV is responsible for the maintenance of wafer fabrication assembly and facilities equipment for production lines. Responsible for troubleshooting and repairing downed equipment and assisting engineering staff in establishing and implementing periodic equipment maintenance. Uses test and diagnostic equipment to perform checkouts. Rebuilds manufacturing equipment.

Technician may participate in safety forums, Emergency Response Teams and station improvement teams.

    • SKILL: As a skilled specialist, completes tasks in creative and effective ways.
    • JOB COMPLEXITY: Works on assignments requiring considerable judgment and initiative. Understands implications of work and makes recommendations for solutions.
    • SUPERVISION: Determine methods and procedures on new assignments. May provide guidance to other nonexempt personnel.
    • EXPERIENCE: Typically requires a minimum of 4 - 6 years of related experience.


ESSENTIAL JOB FUNCTIONS:

    • Responsible for the maintenance of wafer fabrication assembly and facilities equipment for production lines.
    • Responsible for troubleshooting and repairing downed equipment and assisting engineering staff in establishing and implementing periodic equipment maintenance.
    • Responsible for scheduling and working with outside contractors for equipment maintenance covered by service contracts.
    • Responsible for identifying PM's to support stability of wafer fabrication assembly and facilities equipment for production lines with minimal assistance.
    • Use test and diagnostic equipment to perform troubleshooting and repair wafer fabrication assembly and facilities equipment.
    • Rebuilds manufacturing equipment as required.
    • Provides training to other technicians and operators.
    • Responsible for training of peers on process and operational improvement and equipment maintenance.
    • Perform equipment modifications as directed by supervisors, managers and engineers.
    • Technician responsible for training of peers on process and operational improvement and equipment maintenance.
    • Determines methods and procedures on new assignments and may provide guidance to other nonexempt personnel. Collects and evaluates operating and process data and recommends means to improve operational processes.
    • Works on assignments requiring considerable judgment and initiative.
    • Understands implications of work and makes recommendations for solutions.
    • Responsible for, and makes recommendations to, fulfill departmental quality, safety, quantity and teamwork requirements.
    • May be required to ensure other technicians adhere to departmental quality, safety, quantity and teamwork requirements.
    • Trained in proper handling of chemicals and hazardous waste.

    SUPERVISOR RESPONSIBILITY:
    • May provide guidance to other nonexempt personnel.

    QUALIFICATIONS:
    To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
    REQUIRED:
    • High school degree or equivalent and 4-6 years of related experience.
    • Experience working with one or more of the following: high vacuum equipment, lithography tools, wet benches and/or measurement equipment.
    • Ability to trouble shoot, diagnose and repair wafer fabrication assembly and facilitate equipment for product lines, with minimal assistance.
    • Basic computer skills including the use of standard office software, including Word, Excel and Outlook.
    • Ability to work effectively as a member of a diverse team, as well as individually.
    • Excellent verbal and written communication skills.
    • Must be highly organized.
    • Must be a self-starter and comfortable working in an ambiguous environment.
    • Must be able to follow written and verbal instructions.
    • Must be a fast-learner.
    • Must be able to be trained in proper handling of chemicals and hazardous waste.

    DESIRED:
    • Associate's degree or higher.
    • Past supervisor or lead experience.

    PHYSICAL DEMANDS:
    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
    • Standing or walking, use of hands to finger, handling, feeling, reaching with hands and arms, kneeling, crouching or crawling over two-thirds of the time.
    • Lifting up to 25 lbs over two-thirds of the time.
    • Must have normal color vision and must be able to identify wiring color codes.

    WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
    • Works in wafer fabrication and clean room environment, requiring clean room gowning (smock, hood, gloves, booties, etc.)
    • Exposure to moderate noise levels.
    • Exposure to stored energy hazards (electricity, compressed gases, etc.)
    • Works in a facility that houses hazardous chemicals.
    • May potentially handle hazardous waste in accordance with the safe work practices defined in Hazardous Communication and Hazardous Waste training programs. Initial training is required upon hiring status and every 3 years thereafter. Employees handling hazardous waste will insure that waste containers in their work areas are properly labeled and dated. Employees will ensure that waste containers are closed after transferring waste to them. Report any incidents involving hazardous waste to supervisor.

    OTHER:
    • Other duties as may be assigned.
    • Each employee's primary objective is to assure that the quality, delivery and cost controls within his/her control meet or exceed all of our internal and external customers' requirements.
    • Each employee is required to abide by the Employee Handbook and the rules and regulations explained and provided at each orientation and training session. Special attention must be given to the safety aspects of these documents.

    FUJIFILM Dimatix, Inc. provides competitive wages, a generous benefits package and a friendly, dynamic working environment.

About Fujifilm Manufacturing USA, Inc

Fujifilm Manufacturing USA, Inc is a subsidiary of Fujifilm Holdings Corporation, a Japanese multinational conglomerate that specializes in imaging and photography. Fujifilm Manufacturing USA, Inc is responsible for the manufacturing of photographic paper, film, and other imaging products in the United States. The company was established in 1988 and has its headquarters in Valhalla, New York. Fujifilm Manufacturing USA, Inc operates as a subsidiary of Fujifilm North America Corporation.
Learn more about Fujifilm Manufacturing USA, Inc
Size
72,332 employees
Industry
Manufacturing & Automotive
NASDAQ
FUJIF
* Ladders Estimates

Similar Jobs

Ad banner background

Get Ready For Your
Next Interview

More Jobs at Fujifilm Manufacturing USA, Inc

More Manufacturing & Automotive Jobs

Find similar Equipment Maintenance Technician - Front End Days (FED) jobs:

NationwideSanta Clara, CA