Summary

About the Position: This is a Interdisciplinary Program Manager GS-13 position with the U.S. Army Corps of Engineers, Fort Worth District, Regional Planning & Environmental Center (RPEC), in the Military & Interagency Environmental Branch. This position may be filled in: Fort Worth, TX; Galveston, TX; Little Rock, AR; or Tulsa, OK. The duty location chosen for the position is at the discretion of management and will be determined at the time of selection.

Duties

Help

• Serve as a Program Manager, Project Manager, and Technical Manager for the full range of reimbursable environmental remediation, environmental engineering, and environmental compliance programs.
• Serve as primary point of contact for assigned military installations, Base Realignment and Closure (BRAC) and assorted environmental projects and is responsible for monitoring overall program execution.
• Keep customers appraised of program execution status through periodic project and financial reviews.
• Assist other RPEC environmental project managers and technical managers who have been assigned projects within their program area with funding needs, customer concerns, and procedural advice.
• Responsible for managing the accomplishment of project planning, acquisition strategy development, scope preparation, contract pre-award activities, and contract post-award administration of major environmental projects for assigned program areas.
• Represent the District Commander, serving as the district's primary point of contact for assigned projects with customer, federal, state and local government agencies, congressional interests, other external organizations and higher authorities.
• Control and manage project milestones and budgets from planning through project completion.
• Serve as Contracting Officer Representative (COR) for assigned environmental contracts.
• Plan and review the work of Project Managers, Technical Managers and other support staff.
• Serve as Chairperson or Voting Member for contract source selection boards.

Requirements

Help

Conditions of employment

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Appointment to this position is subject to a one-year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315.
• Appointment is required to submit a Financial Disclosure Statement, OGE-450, (5CFR Part 2634, Subpart I USOGE, 6/08).
• Temporary Duty (TDY) Travel is required up to 25% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

• Current Department of Army Civilian Employees
• Current Department of Defense (DOD) Civilian Employee (non-Army)
• Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
• Interagency Career Transition Assistance Plan
• Land Management Workforce Flexibility Act
• Military Spouses, under Executive Order (E.O.) 13473
• Non-Department of Defense (DoD) Transfer
• People with Disabilities, Schedule A
• Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
• Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
• Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
• Priority Placement Program, DoD Retained Grade Preference Eligible
• Reinstatement
• Veterans Employment Opportunity Act (VEOA) of 1998

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Specialized Experience: One year of specialized experience which includes experience performing at least 2 of the 3 following duties: 1) exercising project management duties for environmental remediation, environmental engineering or environmental compliance program(s); OR 2) assisting with the acquisition or administration of contracts for assigned environmental projects; OR 3) obtaining new environmental projects and leading diverse project teams for successful execution. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience aloneno substitution of education for experience is permitted.

You will be evaluated on the basis of your level of competency in the following areas:

• Financial Management
• Oral Communication
• Problem Solving
• Project Management
• Technical Competence

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

In addition to meeting the requirements above, to qualify for this position you must also meet the basic education requirement(s) listed below:

BASIC EDUCATION REQUIREMENTS:

For the 0401 series:

A. Degree: Bachelor's degree (or higher degree) in biological sciences, agriculture, natural resource management, chemistry, or related disciplines appropriate to the position.

OR

B. Combination of Education and Experience: Courses equivalent to a major, as shown in A above, plus appropriate experience or additional education.

For the 0801, 0819 & 0893 series:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

For the 1301 series:

A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.

OR

B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Education

Basic Education Requirements Continued:

For the 1320 series:

A. Degree: Bachelor's degree (or higher degree) in the physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics.

OR

B. Combination of Education and Experience: Course work equivalent to a major in the physical sciences, life sciences, or engineering, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education.

For the 1350 series:

A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography.

OR

B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

• Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
• You will be required to provide proof of U.S. Citizenship.
• One year trial/probationary period may be required.
• Direct deposit of pay is required.
• Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
• If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
• This is a(n) Engineers and Scientists position (Resources and Construction) Career Field position.
• Multiple positions may be filled from this announcement.
• Salary includes applicable locality pay or Local Market Supplement.
  
  • Tulsa, OK and Little Rock, AR -