Summary

This position is part of the Office of Science - Thomas Jefferson Site Office, Department of Energy. As a Federal Project Director, you will serve as the senior Federal Project Director (FPD) and ultimate Thomas Jefferson Site Office (TJSO) authority, providing executive-level leadership, strategic direction, and final programmatic accountability for a landmark federal scientific research portfolio valued in excess of $1.1 billion.

Duties

Help

The Office of Science - Thomas Jefferson Site Office represents the Department of Energy (DOE) in conducting business with SURATech, LLC and others at the Thomas Jefferson National Accelerator Facility.

As an Federal Project Director, you will:

• Direct executive-level strategic execution and operational oversight for major organizational scientific and infrastructure programs.
• Serve as an authoritative technical expert in general engineering and physical sciences to advise executive agency leadership.
• Evaluate program performance metrics, Earned Value Management Systems, and project risks to determine corrective action plans.
• Formulate, review, and defend organizational baseline budget requests to senior departmental officials.
• Champion the integration of sensitive and complex international, state and multi-laboratory partnerships, guiding projects through baselining and execution phases.
• Enforce compliance with Federal acquisition rules, Critical Decision milestone reviews, quality standards, and environmental safety regulations.

Requirements

Help

Conditions of employment

• You are required to submit a Financial Disclosure Statement, OGE-450, Executive Branch Personnel Confidential Financial Disclosure Report upon entering the position and annually (5CFR Part 2634, Subpart I USOGE, 6/08).
• This position is not included in a Bargaining Agreement.
• This position is included in the Department of Energy's Project Management Career Development Program.
• You must be a United States Citizen.
• If you are a male applicant born after December 31, 1959, you must certify that you have registered with the Selective Service System or are exempt from having to do so under the Selective Service Law. See www.sss.gov.
• If selected, you may be required to complete a one year probationary period.
• If selected, your appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position is not remote, the selectee will be expected to report to the duty station(s) listed. If selected, military spouses, veteran caregivers, and spouses of foreign service employees may be eligible for applicable workplace flexibilities.
• Work occasionally requires travel away from the normal duty station.

Qualifications

You must meet both the Basic Requirement and the Specialized Experience to qualify for this series as described below.

BASIC REQUIREMENT FOR 0801 SERIES

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

GS-14 SPECIALIZED EXPERIENCE REQUIREMENTS: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level in the Federal service. You must have one year of specialized experience equivalent to the next lower grade (GS-13). Specialized experience for this position is defined as meeting 3 of 4 of the following:

1. Managing major scientific or engineering project segments against established cost and schedule milestones.
2. Formulating operating spend plans for assigned engineering or physical science project areas.
3. Advising management on the technical maturity and performance of new technologies.
4. Conducting risk assessments to identify operational hazards in technical facility operations.

GS-15 SPECIALIZED EXPERIENCE REQUIREMENTS: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level in the Federal service. You must have one year of specialized experience equivalent to the next lower grade (GS-14). Specialized experience for this position is defined as meeting 3 of 4 of the following:

1. Directing the executive execution of multi-million-dollar scientific or engineering capital asset project portfolios.
2. Evaluating contractor performance against approved project baseline agreements.
3. Serving as a recognized technical authority to resolve complex engineering or physical science problems.
4. Establishing risk response plans to mitigate technical, environmental, or safety hazards across major capital projects.

NOTE: There is no substitution of education for specialized experience for the GS-14 or GS-15 level.

Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications. Your full resume will be made available to the hiring manager if you are referred.

"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Time-in-Grade: Current Federal employees must meet time-in-grade requirements by the closing date of this announcement to receive consideration.

CTAP/ICTAP candidates: To be considered "well qualified" you must (1) meet all of the requirements as described in this section; and 2) be rated "well-qualified", which is defined as having a score of 85 or better.

You must meet all qualifications and eligibility requirements by the closing date of this announcement.

Education

This vacancy has a positive education requirement. In order to be rated as qualified, you must provide copies of your college transcripts. Failure to provide copies of your college transcripts may result in a rating of "Ineligible". Education must be obtained from an accredited institution recognized by the U.S. Department of Education. Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.

BASIC REQUIREMENT FOR 0801 SERIES

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Additional information

• Shared Certificates: The Department of Energy shares lists of applicants among its internal Departmental Elements and organizations. You may be referred for considerat