Summary

You will serve as a Distinguished Engineer/Scientist for Navy Threat Engineering for the Naval Surface Warfare Center Dahlgren Division (NSWCDD).

Duties

Help

• You will be responsible for identifying critical threat and target initiatives to support Fleet and technology and research and development needs in this domain.
• You will lead the development of the Naval competency and technical authority for Threat Engineering.
• You will provide the authoritative and foundational threat models and descriptions to anchor much of NSWC Dahlgren Division's Science and Technology and Research and Development portfolio.
• You will oversee the execution of Threat Engineering work that supports the Science and Technology, Research, Development, Test, and Evaluation, and Acquisition efforts.
• You will lead the development of threat modeling solutions to allow Naval forces to develop/test with fully informed threat representation/information.

Requirements

Help

Conditions of employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• Interim clearance will not be granted. Candidates must already possess TS/SCI clearance.
• This is a Cyberspace Workforce position, work role code 801, proficiency level Basic, the incumbent is required to obtain and maintain qualifications in DoDM 8140.03 Cyber Workforce Qualification and Department of Navy policies.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Functional Area and Tier assigned to the position, along with Continuous Learning (CL) points, are required within established timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin.

To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position.

TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications:

TQ 1- Demonstrated expert knowledge and hands-on experience in threat engineering and complex modeling and simulation efforts, with a proven ability to develop robust threat models, navigate substantial uncertainty, and ensure all model outputs are strictly fit for purpose.

TQ 2- Demonstrated success in building high-performing teams, developing personnel, and forging strategic coalitions across agency and sub-agency levels to integrate threat modeling and engineering throughout intelligence, acquisition, and engineering pipelines.

Additional qualification information can be found from the following Office of Personnel Management website:

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF

AND

Professional Engineering Positions, 0800

General Physical Science Series, 1301

Operations Research Series 1515

Mathematics Series 1520

Computer Science Series 1550

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For 0801 Professional Engineering Series:

A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

-or-

B. Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

(I) Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or

(II) Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or

(III) Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or

(IV) Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

For 1301 General Physical Science Series:

Degree: physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.

-or-

Combination of education and experience education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

For 1515 Operations Research Series:

Degree: in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus.

For 1520 Mathematics Series:

A. Degree: mathematics; or the equivalent of a major that included at least 24 semester hours in mathematics.

-or-

B. Combination of education and experience courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education.

For 1550 Computer Science Series:

Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.

An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.

Additional information

Senior Scientific Technical Manager (SSTM) positions are positions which exceed the ND-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service.

This position is not covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

There are three key documents that contain important information about your rights and obligations. Please read and retain these documents:

• Noncriminal Justice Applicant's Privacy Rights, for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back,
• FD-258 Privacy Act Statement - FBI (this is the same statement used when your fingerprints are submitted as part of your background investigation), and
• SEAD-3-Reporting-U.pdf (dni.gov), (applicable to those who hold a sensitive position or have eligibility for access to classified information)"

Benefits

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.